Creaning up the fuzzies in carvings

This section is for useful tips and tricks for Aspire

Creaning up the fuzzies in carvings

Postby Phil » Sat Jan 05, 2019 5:54 pm

I bought Drillbrush for cleaning a variety of things. I tried it out to remove the fuzzies on a current project and it worked well. I have the yellow bristle attachment. It is available in a variety of course bristles.
https://www.drillbrush.com/

Phil
User avatar
Phil
Vectric Wizard
 
Posts: 2215
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: Creaning up the fuzzies in carvings

Postby highpockets » Sat Jan 05, 2019 7:27 pm

Thanks Phil.
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1939
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Creaning up the fuzzies in carvings

Postby martin54 » Sat Jan 05, 2019 8:50 pm

Haha I have a sort of manual version or two of that, steel & brass wire brushes, scrubbing brush (nylon bristles) that has pretty stiff bristles, a shoe brush (was new) which is softer, couple of toothbrushes with different bristles. I do also have a variety of different types of brush & sanding bits for the dremmel :lol: :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 4152
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Re: Creaning up the fuzzies in carvings

Postby scottp55 » Tue Jan 08, 2019 4:49 pm

Martin....like you :)
1.8.19 BRUSHES MANUAL TYPE.jpg

Elbow grease is good for joints as you get older:)
(Especially as I sit on my hind end all day,with occasional breaks in bed:)
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 2501
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: Shopbot Desktop 5.5"Z/spindle/VCP9

Re: Creaning up the fuzzies in carvings

Postby Phil » Wed Jan 09, 2019 2:49 pm

I have all of those hand tools also, including carving chisels. However, my first choice is always a power tool. That's why I own a CNC - Shopbot. In the words of Tim the Toolman Taylor "More Power" grunt, grunt grunt!! :D :D :D :D

Phil
User avatar
Phil
Vectric Wizard
 
Posts: 2215
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: Creaning up the fuzzies in carvings

Postby scottp55 » Wed Jan 09, 2019 2:58 pm

"To err is Human.............To frig things up Fast....it takes Power Tools" :D :D
User avatar
scottp55
Vectric Wizard
 
Posts: 2501
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: Shopbot Desktop 5.5"Z/spindle/VCP9

Re: Creaning up the fuzzies in carvings

Postby dhellew2 » Thu Jan 10, 2019 9:22 pm

Like all the above, it takes a variety of tools to sand the fuzzies determined by the wood, size, detail, etc.
Since no one makes just the right tool, like most shops, mine takes a bunch. :?

My first choice is an enclosed sand blaster using small grain silica sand.
My second preferred choice is a mop sander for larger areas. These remove the fuss without altering the detail.
Others for fine detail and tight corners include Dremel type tools operated with a pneumatic pen tool [similar to a dentist drill].
These include stainless steel and brass wheels, flexible finger sanding wheels, and an assortment of cutting burrs.
Last but sometimes necessary choice 'elbow grease' with a variety of items with grit or teeth [mini files], emery boards, and dental picks.

As I am certain everyone will agree, the most important and hardest tool to find is patience! :oops: :twisted:
Dale
You will get old if you live long enough!

Dale
User avatar
dhellew2
Vectric Wizard
 
Posts: 1182
Joined: Thu May 22, 2008 10:14 pm
Location: Royal City Washington
Model of CNC Machine: Legacy Artisan 72


Return to Aspire - Tips and Tricks

Who is online

Users browsing this forum: No registered users and 2 guests