4 axis for aspire ?

Post by **gcioffi** » Tue Oct 13, 2009 7:34 pm

hi

Is it possible to work with 4 axis with aspire?

same to artcam Jewelry

Post by **DanielBEE** » Tue Oct 13, 2009 8:07 pm

Good topic here.

http://www.vectric.com/forum/viewtopic. ... lit=4+axis

Post by **Tony Mac** » Tue Oct 13, 2009 8:17 pm

Also worth noting that the next releases of Aspire and VCarve Pro
will also include wrapped rotary axis toolpath support.

See > http://www.vectric.com/forum/viewtopic. ... 935#p45935

Tony

Post by **rbrague** » Tue Oct 13, 2009 9:59 pm

That is great to hear-Do you have an estimated date for your next release of Vcarve and Aspire?

Thanks

Post by **cabnet636** » Tue Oct 13, 2009 10:08 pm

rbrauge, do you have a rotary axis?

jim

Post by **gcioffi** » Wed Oct 14, 2009 9:05 pm

thanks Tony , have estimate date ?

Post by **Tony Mac** » Wed Oct 14, 2009 9:15 pm

Aiming for around the end of November / early December.
This depends on how the testing goes and whether any major
problems surface, so please don't hold us to this

Tony

Post by **gcioffi** » Wed Oct 14, 2009 9:34 pm

very beutifuol ASPIRE

thanks

Post by **cabnet636** » Wed Oct 14, 2009 11:45 pm

man do i need this cause i sure am getting tired of the fred flinstone method!!

Post by **Burchtree** » Wed Oct 14, 2009 11:58 pm

FRED! Get back to work
Mr Slate

Post by **BSImages** » Thu Oct 15, 2009 12:02 am

WOW!
Thanks Vectric!!!

Post by **cabnet636** » Thu Oct 15, 2009 12:53 pm

i have asked a question in hardware about this as i feel there will be others new to rotary like my self

http://www.vectric.com/forum/viewtopic. ... 614#p46614

jim

Vectric Customer

4 axis for aspire ?

4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?

Re: 4 axis for aspire ?