I found the "Two Tool Pocketing" which is great but is there a "Two Tool Finishing"? I would love doing a 3D finishing tool path with a large bit then use a smaller bit to get into areas that the large bit could not fit into without running the smaller bit over the complete design.
I have seen it mentioned that it is covered in one of the tutorials but have not found it yet and I have seen all the tutorials. Could someone point me in the right direction or explain the process to me?
Two Tool Pocketing
- Turtle49
- Vectric Wizard
- Posts: 1496
- Joined: Mon Aug 27, 2007 9:11 pm
- Model of CNC Machine: 4' EZ-Router and Blurry customs SK25
- Location: Holland, MI. U.S.A
- Contact:
Re: Two Tool Pocketing
Yes, its called "Rest Machining". I thought there was going to be a video that went over it. But I can't seem to find it....
Maybe one of the Vectric guys can point us in the right direction.
Tim
Maybe one of the Vectric guys can point us in the right direction.
Tim
Tim Hornshaw
www.HornshawWoodWorks.com
www.HornshawWoodWorks.com
- Adrian
- Vectric Archimage
- Posts: 14687
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Two Tool Pocketing
It's in video 7 that hasn't appeared yet.
Re: Two Tool Pocketing
An additional video showing how Rest Machining boundaries and toolpaths can be
calculated and this is at the bottom of the Aspire Tutorial page.
Rest Machining > http://www.vectric.com/WebSite/Vectric/ ... videos.htm
Tony
calculated and this is at the bottom of the Aspire Tutorial page.
Rest Machining > http://www.vectric.com/WebSite/Vectric/ ... videos.htm
Tony
Re: Two Tool Pocketing
That is what I was looking for.
Thank you Tony.
Thank you Tony.