Hi
My cnc has home position X= 45, Y=45 and Z=-45, how can i work around this in aspire. My Z starts at 0 to -300
Putting home position 0,0,45, will my machine assume the 45 as -45?
Best Regards
Alex
My machine home position
- harryball
- Vectric Craftsman
- Posts: 161
- Joined: Wed Oct 04, 2006 7:53 pm
- Model of CNC Machine: ShopBot PRT Alpha
- Location: Jackson, GA
- Contact:
Re: My machine home position
You are interested in the origin settings when setting up your material. If you are in the middle of a square table you can select the origin to be the middle of your part, otherwise I believe you will have to use origin offset feature to make your settings for X and Y. Home Z is easy to set as well. See attached image...
Robert
http://www.habitatforbats.org
Give a Bat a Home!
http://www.habitatforbats.org
Give a Bat a Home!