I was playing around with the sculpting tools (making a shallow bowl shape) and I got an error message noting that the shape was thicker than the model. The depth of the bowl shape was 1/4 inch and the material thickness was set for 1-3/4 inch.
Anybody know what's going on??
I thought the model thickness would be the same as the material thickness. Go figure. If they are different, where can I go to find out what the model thickness is? I already know where to find the material thickness.
Model thickness and material thickness
Model thickness and material thickness
Bob Fain
Wood'N'What-Knots
Custom Woodworks for Home or Office
Flagstaff, Arizona
Wood'N'What-Knots
Custom Woodworks for Home or Office
Flagstaff, Arizona
Re: Model thickness and material thickness
Bob click on the bottom right icon under the Modelling Tools ( scale Z). It will let you know what the height is. You can change it from there to match your material being used.
Chuck
Chuck
Re: Model thickness and material thickness
Chuck,
Thanks for your quick reply. I figured there would be an easy solution to this one. That's what makes Aspire such a great program!
Thanks for your quick reply. I figured there would be an easy solution to this one. That's what makes Aspire such a great program!
Bob Fain
Wood'N'What-Knots
Custom Woodworks for Home or Office
Flagstaff, Arizona
Wood'N'What-Knots
Custom Woodworks for Home or Office
Flagstaff, Arizona