Demo verson ?

This forum is for general discussion about Aspire
cleenrmn
Vectric Apprentice
Posts: 85
Joined: Wed Mar 21, 2007 5:00 am
Location: Tulare, California

Demo verson ?

Post by cleenrmn »

tony and brian any idea when your going to have a demo version im probably going to buy aspire but woud like to play a little first to get my head adjusted first so i can rock and roll when i get it

Randy
Vectric Apprentice
Posts: 62
Joined: Tue Jul 18, 2006 5:31 pm
Location: Garland, Texas USA

Re: Demo verson ?

Post by Randy »

How about "4+ hours ago"?
Slowly I turned...
Randy

User avatar
RoutnAbout
Vectric Wizard
Posts: 2085
Joined: Mon Sep 19, 2005 11:09 pm
Model of CNC Machine: 24x18 Desktop
Location: North Manchester, Indiana

Re: Demo verson ?

Post by RoutnAbout »

cleenrmn wrote:tony and brian any idea when your going to have a demo version im probably going to buy aspire but woud like to play a little first to get my head adjusted first so i can rock and roll when i get it
Cleenrmn,
Like Randy posted about 4+ hours ago.

Fill your information out on the form. Once you submit your information you will be taken to the Aspire download page
Aspire Demo Download
Roll of Honor <-- Never Forget
________
Don

cleenrmn
Vectric Apprentice
Posts: 85
Joined: Wed Mar 21, 2007 5:00 am
Location: Tulare, California

Re: Demo verson ?

Post by cleenrmn »

correct me if im wrong but i didnt see anything one the page about aspire

Randy
Vectric Apprentice
Posts: 62
Joined: Tue Jul 18, 2006 5:31 pm
Location: Garland, Texas USA

Re: Demo verson ?

Post by Randy »

Click the DOWNLOADS button on the link RoutnAbout gave you.

(Proud owner of an autographed Aspire DVD.)
Slowly I turned...
Randy

User avatar
Turtle49
Vectric Wizard
Posts: 1493
Joined: Mon Aug 27, 2007 9:11 pm
Model of CNC Machine: 4' EZ-Router and Blurry customs SK25
Location: Holland, MI. U.S.A
Contact:

Re: Demo verson ?

Post by Turtle49 »

cleenrmn wrote:correct me if im wrong but i didnt see anything one the page about aspire
Your right that it doesn't show up on the initial download page. After you fill out the form it will send you to a page that does have it.

Good Luck,
Tim
:D
Tim Hornshaw
www.HornshawWoodWorks.com

cleenrmn
Vectric Apprentice
Posts: 85
Joined: Wed Mar 21, 2007 5:00 am
Location: Tulare, California

Re: Demo verson ?

Post by cleenrmn »

thanks guys im there and running

moto633
Vectric Wizard
Posts: 1123
Joined: Sun Jul 13, 2008 11:59 am
Location: Rockbridge, Ohio

Re: Demo verson ?

Post by moto633 »

Just down loaded the trial to play with till mine gets out of the mail mans hands!!!!

This stuff is so cool.

AHHHHHHHHH :shock: :shock: :lol: :lol:

Nick

User avatar
GripUs
Vectric Wizard
Posts: 806
Joined: Thu Jan 18, 2007 2:07 pm
Location: San Angelo, Texas
Contact:

Re: Demo verson ?

Post by GripUs »

Hrummp! :x I can't see the video buttons, I can't get the download to work.

I have changed every setting on my computer I can think of and still nothing. I know it is there because I saw it on my computer at the office.

Was it something I said? :?
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/

User avatar
Turtle49
Vectric Wizard
Posts: 1493
Joined: Mon Aug 27, 2007 9:11 pm
Model of CNC Machine: 4' EZ-Router and Blurry customs SK25
Location: Holland, MI. U.S.A
Contact:

Re: Demo verson ?

Post by Turtle49 »

GripUs wrote:Hrummp! :x I can't see the video buttons, I can't get the download to work.

I have changed every setting on my computer I can think of and still nothing. I know it is there because I saw it on my computer at the office.

Was it something I said? :?
Did you try a different browser?

I use Firefox and everything shows up.....
Tim
:D
Tim Hornshaw
www.HornshawWoodWorks.com

bryson
Vectric Craftsman
Posts: 123
Joined: Tue Jul 18, 2006 3:23 am
Model of CNC Machine: ShopBot PRS 48 X 96 Aspire
Location: Granville,PA USA
Contact:

Re: Demo verson ?

Post by bryson »

Thanks gang for the pertinent detail!! Now I'll be up all night playing!!!
Bryson
ShopBot PRT 96
Corel X3
Aspire
Photo V-Carve
Cut 3D
Adobe Illustrator

User avatar
GripUs
Vectric Wizard
Posts: 806
Joined: Thu Jan 18, 2007 2:07 pm
Location: San Angelo, Texas
Contact:

Re: Demo verson ?

Post by GripUs »

Tim,
I took your advice and downloaded FoxFire. LOL I could never get it to even connect to the internet. I will try it at the shop tomorrow. grumble, grumble, grumble.

Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/

calgrdnr
Vectric Wizard
Posts: 970
Joined: Tue Mar 20, 2007 6:29 am
Model of CNC Machine: ShopBot prt with 4g upgrade
Location: Visalia, Ca

Re: Demo verson ?

Post by calgrdnr »

Joe turn of any pop up blockers , also check your firewall it can block it also. you can turn off firewall try if works great don't forget to turn back on

dewalt58
Vectric Apprentice
Posts: 99
Joined: Mon Jul 28, 2008 11:37 am
Location: New Hope, Alabama, USA

Re: Demo verson ?

Post by dewalt58 »

I got my DEMO down loaded ok......just waiting for postman to bring the real thing!!! I noticed you can't type in the license number on the trial demo, must wait for the DVD.

Cheers
AL
Always looking for a different way of doing things!!!

User avatar
GripUs
Vectric Wizard
Posts: 806
Joined: Thu Jan 18, 2007 2:07 pm
Location: San Angelo, Texas
Contact:

Re: Demo verson ?

Post by GripUs »

Hi Kent,
I have shut down my firewall, all of my anti-virus software, anti-spyware software, set my IE security settings to "come and get me, accpet everything." Lady Godiva was not as exposed as I am. Still nothing. Mark sent me an email asking for my system/settings info, so maybe we can get it done. Thanks for taking time to write.

Regards,

Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/

Post Reply