brian, will we be able to read the pdf while we are waiting on our software ?
also would it be a good idea to pull the original aspire thread from vcarve general up here to aspire there is a lot of exchange there!
jim
Welcome to Aspire!
-
- Vectric Apprentice
- Posts: 91
- Joined: Thu Aug 16, 2007 10:10 pm
- Location: Saint-Jean-sur-Richelieu Qc Can
- Contact:
Re: Welcome to Aspire!
Wow, this software is way cool, I hope the upgrade from V-carve holds for a while. I would really like to see the beveled letters, I see it's in the features but I've not seen any on the gallery so far. This is a must for me. I managed to do some acceptable beveled letters with V-carve, but the peaks vary a lot. I hope aspire can make them even. Also, is it just for artistic mather or can it be used for precision 3D Example: can it mirror for molds, design and cut brackets etc...
Dan
Dan
Don't throw it away, carve it !!!!
www.enseignesbp.com
www.enseignesbp.com
- maxmachine
- Vectric Apprentice
- Posts: 90
- Joined: Fri Jul 27, 2007 5:47 pm
- Location: Corvallis, Oregon
Re: Welcome to Aspire!
I feel like a junkie waiting for his next fix..... I have been checking email every couple of hours! The money is burning a hole in my pocket. Vectric is the only software company that I would send money to sight unseen, no questions asked. It is because of the service and support on this forum first, and an excellent product second. Their VCarve pro absolutely changed the landscape in one blow, leaving all of the other suppliers in the dust. Congratulations on another home run.
Mark (In the business for 30 years)
Mark (In the business for 30 years)
Haas VF4, ULS X2-660, 3 Xene engravers, New Hermes & Gorton pantos, 52" vinyl cutter, 2x3 router
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: Welcome to Aspire!
mark you can buy it now got to the website.
jim
jim
- Turtle49
- Vectric Wizard
- Posts: 1496
- Joined: Mon Aug 27, 2007 9:11 pm
- Model of CNC Machine: 4' EZ-Router and Blurry customs SK25
- Location: Holland, MI. U.S.A
- Contact:
Re: Welcome to Aspire!
I noticed something odd on the website.
When you go to the Gallery for Aspire;
http://www.vectric.com/WebSite/Vectric/vgallery/aspire/aspire_gallery.htm
And click on the "Next" link, it takes you to the VCarve pro gallery.
Tim
When you go to the Gallery for Aspire;
http://www.vectric.com/WebSite/Vectric/vgallery/aspire/aspire_gallery.htm
And click on the "Next" link, it takes you to the VCarve pro gallery.
Tim
Tim Hornshaw
www.HornshawWoodWorks.com
www.HornshawWoodWorks.com
Re: Welcome to Aspire!
Hi Tim,
By design - we don't have many images for the Aspire gallery at the moment so
decided to link to the VCarve Pro projects as they are equally valid for Aspire.
Tony
By design - we don't have many images for the Aspire gallery at the moment so
decided to link to the VCarve Pro projects as they are equally valid for Aspire.
Tony
-
- Vectric Apprentice
- Posts: 91
- Joined: Thu Aug 16, 2007 10:10 pm
- Location: Saint-Jean-sur-Richelieu Qc Can
- Contact:
Re: Welcome to Aspire!
Well thanks CRFultz, that is somewhat what I was hoping for, I really want to get this Aspire... Soon after x-masCRFultz wrote:Dan is this what you were referring to?
Chuck
Dan
Don't throw it away, carve it !!!!
www.enseignesbp.com
www.enseignesbp.com