Halloween Is Around the Corner

Post by **TReischl** » Mon Sep 16, 2019 8:05 pm

Working on my modeling again today. SWMBO suggested I do a pumpkin and she will paint it and put it out by the front door. Sounds like a deal to me!

If anyone is interested in having the file, here it is:

https://1drv.ms/u/s!AtBXEhuw0FKsiIMs99K ... w?e=zUQ3qG

As usual, this is my original work and you are free to use it however you please.

Post by **mark-s** » Mon Sep 16, 2019 8:13 pm

Thank you for all the stl files you share.
What bit do you recommend to cut that with.
Thanks again.
mark-s

Post by **WNC_Ed** » Mon Sep 16, 2019 8:17 pm

Halloween? Feels more like Christmas with the free models

Thank you for sharing Ted!

Post by **highpockets** » Mon Sep 16, 2019 8:37 pm

Thanks again Ted. Great model....

Post by **TReischl** » Mon Sep 16, 2019 9:09 pm

mark-s wrote:Thank you for all the stl files you share.
What bit do you recommend to cut that with.

That depends on the size you cut it and how far away it is intended to be viewed from.

When I do it for the front door area I will probably cut it about 10 inches tall, raise it up a bit from the base (set a base height) and give it a try with a .25 ball nose. That model is lots of smooth and very few sharp edges so I don't think using a smaller bit at that size would be an advantage. If I am not happy with the crispness then I will pull out the carving tools and do a bit of touching up and undercutting.

Thanks again.
mark-s

Post by **TReischl** » Mon Sep 16, 2019 9:13 pm

Thanks John and Ed.

My focus these days is on modeling and I see no reason not to share what I do with everyone else.

I am wondering how long it will be before one of the internet pirates steals this stuff and tries to sell it like they have done with some of Michael Tylers stuff. I recently saw his key ring holder being sold on the big auction site for like $3.

Post by **rtibbs** » Mon Sep 16, 2019 10:59 pm

Thanks Ted,
Much appreciated as wifey has been making quilted pumpkin wall hangings lately.
My turn with wood

Post by **Bob Jr** » Tue Sep 17, 2019 1:07 am

Ted,
Thank you for the pumpkin.
Bob

Post by **scottp55** » Tue Sep 17, 2019 1:34 pm

Thank you Ted!!

scott

Post by **Holzarbeiter** » Thu Sep 19, 2019 2:09 pm

Ted, thank you for sharing your talent and the files! You are an inspiration...and an extra early Santa.
Joe

Post by **TReischl** » Thu Sep 19, 2019 8:39 pm

AHAH! SANTA!

I have been sitting here the last few days thinking of what I would like to do next that would help in this quest to learn 3D modeling. Perfect! Then I can get into a simple candy cane, bells, all sorts of stuff.

On top of it all, Christmas is my favorite holiday!

Post by **Holzarbeiter** » Fri Sep 20, 2019 2:24 pm

TReischl wrote:AHAH! SANTA!

I have been sitting here the last few days thinking of what I would like to do next that would help in this quest to learn 3D modeling. Perfect! Then I can get into a simple candy cane, bells, all sorts of stuff.

On top of it all, Christmas is my favorite holiday!

My work here is done!

Post by **rtibbs** » Fri Sep 20, 2019 7:27 pm

Pumpkin in a dish

Need to tidy things up a bit then decide on a finish.
Had to move this one up in the queue as the season is fast approaching

Vectric Customer

Halloween Is Around the Corner

Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner

Re: Halloween Is Around the Corner