This has always worked in the past - but no more.
I add a new material (see first image), the close Aspire. Then reopen Aspire and look in the material drop down - 2nd image.
The material I just added is not there.
HELP!
Add Materials in Aspire 9.517
-
- Posts: 4
- Joined: Mon Dec 05, 2011 6:14 pm
- Model of CNC Machine: Shark Pro ... Legacy Artisan
- Adrian
- Vectric Archimage
- Posts: 14659
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Add Materials in Aspire 9.517
I always put mine into the Vectric Files area rather than the ProgramData. That way they are available to all Vectric programs, are easier to backup and you don't have to remember to check the migrate box when upgrading.
Folder location on a default Windows 7,8,10 install is C:\Users\Public\Documents\Vectric Files\Material Images
One thing I did notice is that you have some files with a JPG extension and some with a JPEG extension. Maybe JPEG extensions don't work?
Folder location on a default Windows 7,8,10 install is C:\Users\Public\Documents\Vectric Files\Material Images
One thing I did notice is that you have some files with a JPG extension and some with a JPEG extension. Maybe JPEG extensions don't work?
-
- Vectric Apprentice
- Posts: 57
- Joined: Sat Jan 12, 2013 1:01 pm
- Model of CNC Machine: Wabeco F1410 LF-C HS; Sorotec AL1110
- Location: Wurmberg, Germany
Re: Add Materials in Aspire 9.517
Same idea here. Try renaming the file to *.jpg.Adrian wrote:... One thing I did notice is that you have some files with a JPG extension and some with a JPEG extension. Maybe JPEG extensions don't work?