Rotary post processor
Rotary post processor
I will be using Aspire to generate tool paths for my Centroid based machine. I see that there is no post P for a rotary tool path. Is this available somewhere?
Re: Rotary post processor
see this post: https://www.machsupport.com/forum/index ... #msg260385
There is a downloadable modified post processor that uses inverse time feed. You may have to modify it to support your rotary axis. I use C as my rotary not A or B.
HTH
RT
There is a downloadable modified post processor that uses inverse time feed. You may have to modify it to support your rotary axis. I use C as my rotary not A or B.
HTH
RT
- IslaWW
- Vectric Wizard
- Posts: 1402
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: Rotary post processor
Tom...
I have an inverse time feed postp that was developed a year ago and tested on Centroid software. I am in N Georgia doing a 2 day training and will mail it to you when I get home this weekend.
I have an inverse time feed postp that was developed a year ago and tested on Centroid software. I am in N Georgia doing a 2 day training and will mail it to you when I get home this weekend.
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com