Here is the picture I could not upload in my previous post
I like the rope work. Most of the rope work I see in models
look flat.
could this be modeled in Aspire with picture
- Makingtoothpicks
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 23, 2013 8:46 pm
- Model of CNC Machine: Cncrouterparts CPR2448
- Location: Burien, Wa
- Contact:
- Mike-S
- Vectric Wizard
- Posts: 1123
- Joined: Mon Jun 13, 2011 6:45 am
- Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
- Location: Hayesville, NC
Re: could this be modeled in Aspire with picture
There is a single rope link in the library. Copy along edge vector. Add to component height if too flat.
-
- Vectric Wizard
- Posts: 338
- Joined: Wed Aug 12, 2009 2:09 am
- Model of CNC Machine: Taig Mill and Self Built Routers
- Location: Space Coast, Florida
Re: could this be modeled in Aspire with picture
There are a lot of undercuts in the picture you posted. That will not model in aspire nor be easy to machine on a standard 3 axis CNC machine if you get the model somewhere else. You could model most of it in Aspire and then hand carve the undercuts if you are able / willing.
Ed
Ed
- Bob Jr
- Vectric Wizard
- Posts: 461
- Joined: Thu Aug 13, 2009 2:13 am
- Model of CNC Machine: Axiom, Shark
Re: could this be modeled in Aspire with picture
Mike,Mike-S wrote:There is a single rope link in the library. Copy along edge vector. Add to component height if too flat.
I never even thought of copying a 3D object along a vector! ...In VCarve Pro.
This is going to lead to all sorts of fun.
Thank you,
Bob
"Be accurate."
W. Tell
W. Tell
Re: could this be modeled in Aspire with picture
Once it's modeled and Sliced, Aspire can do it a a double sided project. It might take more than one slice, but it could be done.There are a lot of undercuts in the picture you posted. That will not model in aspire nor be easy to machine on a standard 3 axis CNC machine if you get the model somewhere else. You could model most of it in Aspire and then hand carve the undercuts if you are able / willing.
Gary
- Xxray
- Vectric Wizard
- Posts: 2300
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: could this be modeled in Aspire with picture
I wouldn't use that particular pic for a model, its heavily cropped for one.
There are loads of celtic cross designs available, both paid and free.
There are loads of celtic cross designs available, both paid and free.
Doug