error when trying to update

This forum is for general discussion about Aspire
Post Reply
User avatar
sawmiller
Vectric Wizard
Posts: 531
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

error when trying to update

Post by sawmiller »

error i get with 9.5 update
error i get with 9.5 update
something i noticed with the 9.5 update.
with the update, you update by clicking on the text in the upper right corner, i get this error a lot now.
i live in the woods, just a slow , low bandwidth. typically less than 80kb/s.
if it takes too long it fails off now, where it didnt before.
can we possibly get update downloads in the vco section too?

thanks, dan
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: error when trying to update

Post by Adrian »

The individual patch updates can be downloaded from https://www.vectric.com/support/program-updates.html

The full latest install is in the V&Co portal.

User avatar
sawmiller
Vectric Wizard
Posts: 531
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

Re: error when trying to update

Post by sawmiller »

maybe they could put a link to that in the vco, since thats the main repository now ?
thanks for the link adrian, ill dl the latest update, much easier than driving into town to download on my laptop.
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

Post Reply