Inlay Issues with Mail toolpath

[xoneeleven]

After reviewing the modified file, it looks like the bit used on the male cutout had been corrupted with inaccurate data. (the 1/8th in endmill that I had there originally)

I fixed the bad spec data and the simulation works fine.

Thanks again for helping with that, Michael.

Sometimes, tiny details such as a bad parameter on a bit spec is hard to notice.

[mtylerfl]

After reviewing the modified file, it looks like the bit used on the male cutout had been corrupted with inaccurate data. (the 1/8th in endmill that I had there originally)

I fixed the bad spec data and the simulation works fine.

Thanks again for helping with that, Michael.

Sometimes, tiny details such as a bad parameter on a bit spec is hard to notice.

Hi Mark,

Thanks for letting us know you discovered the problem and you're all set now! Happy to have helped.