hey folks,
i have a customer that wants a carving in his mantel of a wooden speedboat, specifically a chris craft wood boat. has anyone seen a model that would be a good starting point ?
i have seen somewheres , a 3d boat pulling a skier, but cant remember where.
thanks for reading.
dan
looking for a boat model
- sawmiller
- Vectric Wizard
- Posts: 531
- Joined: Sat May 03, 2008 8:34 pm
- Model of CNC Machine: joe's rack and pinion hybrid
- Location: camden,tn
looking for a boat model
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
In the heart of Tn
- mfirlott
- Vectric Craftsman
- Posts: 299
- Joined: Thu Feb 07, 2013 12:49 am
- Model of CNC Machine: Stinger 1 (2014)
- Location: Cantley, Quebec, Canada
- Contact:
Re: looking for a boat model
Have you tried a search of Thingiverse.com? Here's one. There were many with a "speed boat" search that came up.
https://www.thingiverse.com/thing:1752110/files
https://www.thingiverse.com/thing:1752110/files
(Mitch)
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser
CAMaster Stinger I
Vectric Aspire
Epilog 45watt Helix Laser
- sawmiller
- Vectric Wizard
- Posts: 531
- Joined: Sat May 03, 2008 8:34 pm
- Model of CNC Machine: joe's rack and pinion hybrid
- Location: camden,tn
Re: looking for a boat model
Interesting, still would have to make the wake, but irs a start
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
In the heart of Tn
- martin54
- Vectric Archimage
- Posts: 7349
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: looking for a boat model
Thats why you bought Aspire rather than a lower cost software like vcarve prosawmiller wrote:Interesting, still would have to make the wake, but irs a start
Haven't had a search but have you tried all the usual places ? Design & Make, turbosquid, grabcad, 3dmodel club, yegi, thingiverse to name a few
- sawmiller
- Vectric Wizard
- Posts: 531
- Joined: Sat May 03, 2008 8:34 pm
- Model of CNC Machine: joe's rack and pinion hybrid
- Location: camden,tn
Re: looking for a boat model
ended up modding a boat model off thingverse...
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
In the heart of Tn