The 2023 UGM is now LIVE 🎉

[Stephanie Downing]

Our first session - Introduction with Edward will be going LIVE in 25 minutes!

Tune in here: https://ugm.vectric.com/session/introdu ... what-s-new

Make sure you've logged in at the top of the website to be able to get involved in the live chat.

See you over there.

[Stephanie Downing]

Check out David's session on 'making memories with Lithophanes'

Available now: https://ugm.vectric.com/session/lighting-up-memories

[Stephanie Downing]

Next up we have our first ever German session.

Tune in for our Guest presenter Maik Kampfer of Wooden Signs as he shows how to create an awesome Workshop Tool Rack.

Don't worry - If you can't speak German we have English subtitles to get you through...
Tune in here: https://ugm.vectric.com/session/worksho ... k-kaempfer

[Stephanie Downing]

Introducing our next guest - Eric Schimelpfening from Avid CNC who will be showing how he creates Laser terrain maps!

Tune in here:https://ugm.vectric.com/session/laser-terrain-maps

[Stephanie Downing]

Next up we have Stone from Onefinity!!

Tune in here: https://ugm.vectric.com/session/two-sid ... -onefinity

[Stephanie Downing]

Introducing...Randy Johnson, who will be talking about VCarved patterns in this next session.

Tune in here: https://ugm.vectric.com/session/vcarved ... dy-johnson

[Stephanie Downing]

Todd is up next with his session on Modeling Victor!

Tune in here: https://ugm.vectric.com/session/3d-mode ... -of-victor

[Stephanie Downing]

Watch George Vondriska's session on cutting leather with a drag knife on your CNC

Tune in here: https://ugm.vectric.com/session/cutting ... n-your-cnc

[Stephanie Downing]

Last session of day 1 and we're ending with a good one.

Join Beki for her session on Multi-sided machining.

Tune in here: https://ugm.vectric.com/session/multi-sided-machining

[Stephanie Downing]

Who's ready for Day 2

First up today we have Olly - With a session on Hybrid Laser Machining.

Tune in here: https://ugm.vectric.com/session/hybrid- ... ing-models

[Stephanie Downing]

Next up we have the first of our guest speakers for today, Alain Vaillancourt.

Tune in here: https://ugm.vectric.com/session/rotary- ... ilaincourt

[Stephanie Downing]

Support Manager Charlie is next up with her session on 2.5D House Signs.

Tune in here: https://ugm.vectric.com/session/2-5d-house-sign

[Stephanie Downing]

Next up we welcome Router Bob for his tips on efficient machining.

Tune in here: https://ugm.vectric.com/session/efficient-machining

[Stephanie Downing]

Tune in at 4pm BST for Beki's Design & Make 3D Modeling Session.

Watch here: https://ugm.vectric.com/session/design- ... -machining

[Stephanie Downing]

Next we have a French guest speaker - Olivier Verdier.

Check out his session on creating parts for his circus trailer here:https://ugm.vectric.com/session/circus-trailer