I have a 3D carving project for a restaurant, it is a carved figure of a Mayan goddess (sorry cannot attached the image on this forum, I tried, but it is not letting me), I have never done anything like it. If anyone has experience with 3D carving, please let me know if interested on working with me this specific job.
I will need an answer soon, as I am at the point of confirming to the client if can do it or not.
Please contact me directly to my email horacio@leongeneralhardwoods.com, so I can share the image and discuss it directly.
I hope I can find the help within this forum, looking forward to your responses
Horacio
Help with 3D CARVE
- sharkcutup
- Vectric Wizard
- Posts: 2885
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: Help with 3D CARVE
How big is it going to be carved?
SHARKCUTUP
SHARKCUTUP
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Help with 3D CARVE
If the file is too large to upload here you can use a file sharing site such as drive.google.com, onedrive.com, or dropbox.com. They all have free accounts available
On many Windows systems you can also use <Windows-key><Shift><S>
- Upload the file to the file sharing site
- Make the link shareable
- Share the link to the file here
On many Windows systems you can also use <Windows-key><Shift><S>
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop