In version 8.5 when you draw a line that is exactly horizontal or vertical the indicator at the end of the line turns to a circle with a line drawn through it indicating that the line is exactly horizontal or vertical. This horizontal /vertical indication does not appear in Version 9. Has this nice feature been dropped in Version 9 or is there a way to enable it?
Dan
Horizontal & Vertical Line Indicator
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Horizontal & Vertical Line Indicator
It has been greatly enhanced.
Try turning on Smart Snapping. Should be a icon in the upper right corner of the display, a box with a square vertical and horizontal dotted lines and a triangle.
You can also press F4 to bring up Snap Options.
Try turning on Smart Snapping. Should be a icon in the upper right corner of the display, a box with a square vertical and horizontal dotted lines and a triangle.
You can also press F4 to bring up Snap Options.
John
Maker of Chips
Maker of Chips
-
- Vectric Apprentice
- Posts: 88
- Joined: Wed Jul 27, 2011 3:36 am
- Model of CNC Machine: 4x4 DIY Router
- Location: Starkville, MS
Re: Horizontal & Vertical Line Indicator
A major enhancement!
Many Thanks hightpockets.
Dan
Many Thanks hightpockets.
Dan