Removal of topic
-
- Vectric Craftsman
- Posts: 170
- Joined: Sun Jul 28, 2013 9:09 pm
- Model of CNC Machine: Shopbot Desktop
Removal of topic
I submitted a question to the Vectric forum and verified it was posted at 0638 hours on February 17, 2018. Went to the forum within the past 15 minutes 1000 hours to inquire if anyone had responded to my question and my topic was no longer on the site. The question pertained to hardware/software issue and I posted to Vectric for a larger group of individuals. Anyone have an idea why my question was removed?
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Removal of topic
Was it your post entitled "Stop button is on"?
If so, it has not been removed and Adrian responded to your question.
If so, it has not been removed and Adrian responded to your question.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- Adrian
- Vectric Archimage
- Posts: 14650
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Removal of topic
I expect you posted it to the wrong section and it was moved to the correct one. When I responded it was in the Hardware section. If you posted it in the software sections (Aspire/VCarve/Cut2D etc) then an admin would have moved it.
It is here - http://forum.vectric.com/viewtopic.php?f=35&t=29342
It is here - http://forum.vectric.com/viewtopic.php?f=35&t=29342
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Re: Removal of topic
Goodness, you guys are quick!
As Adrian and Michael have responded, the post was moved to the hardware section as it did not have anything to do with the software, and there is a greater chance of someone responding to a hardware question as VCarve, Cut2D and Aspire users may pay attention then. However, as this was a ShopBot specific question, ShopBot's own forum is going to have a wider audience of ShopBot owners who may be able to help you.
I can see you also posted on the ShopBot forum, and have received help there.
Brian
As Adrian and Michael have responded, the post was moved to the hardware section as it did not have anything to do with the software, and there is a greater chance of someone responding to a hardware question as VCarve, Cut2D and Aspire users may pay attention then. However, as this was a ShopBot specific question, ShopBot's own forum is going to have a wider audience of ShopBot owners who may be able to help you.
I can see you also posted on the ShopBot forum, and have received help there.
Brian