Moulding tool path issue

Post by **Will Williamson** » Fri Jan 19, 2018 1:17 pm

I am haveing an issue with creating sharp corners. Any suggestions

Post by **mezalick** » Fri Jan 19, 2018 1:49 pm

Try using the other rail....
Michael

Post by **Will Williamson** » Fri Jan 19, 2018 2:16 pm

I can get the one rail to work, but not the other, there must be something wrong, with my geometry. This should be a moulding 3.5 wide x 1.75 tall with a 1.625 radius on both edges.

Post by **Will Williamson** » Fri Jan 19, 2018 2:38 pm

I got it Thanks

Post by **Will Williamson** » Fri Jan 19, 2018 4:47 pm

Big Cabinet almost 14 feet tall, this is a display cabinet. for a leaded glass window.

Vectric Customer

Moulding tool path issue

Moulding tool path issue

Re: Moulding tool path issue

Re: Moulding tool path issue

Re: Moulding tool path issue

Re: Moulding tool path issue