Strat Fender help

This forum is for general discussion about Aspire

Strat Fender help

Postby dave gangster » Sat Jan 13, 2018 2:07 am

Hi can any one tell me how to make the belly curve and arm rest curve on a strat fender guitar. Imported pdf then converted it to vectors front and rear all working but now i'am stuck. I can do all the pockets etc just don't know how to do this Thanks Dave.
dave gangster
Vectric Apprentice
 
Posts: 7
Joined: Wed Dec 02, 2015 7:56 am
Model of CNC Machine: Home made 3 axis 715mm x1mt

Re: Strat Fender help

Postby Rcnewcomb » Sat Jan 13, 2018 2:26 am

Use two rail sweeps or fluting toolpaths.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3073
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Strat Fender help

Postby dave gangster » Sat Jan 13, 2018 3:01 am

Thanks Randell will try that all the best Dave.
dave gangster
Vectric Apprentice
 
Posts: 7
Joined: Wed Dec 02, 2015 7:56 am
Model of CNC Machine: Home made 3 axis 715mm x1mt

Re: Strat Fender help

Postby dave gangster » Mon Jan 15, 2018 8:05 am

Hi Randell , thank you for your help it works all the best Dave. 10 fingers 10 toes good day thanks.
dave gangster
Vectric Apprentice
 
Posts: 7
Joined: Wed Dec 02, 2015 7:56 am
Model of CNC Machine: Home made 3 axis 715mm x1mt

Re: Strat Fender help

Postby Rcnewcomb » Mon Jan 15, 2018 7:13 pm

it works

Please show us photos of your progress with the project.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3073
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Strat Fender help

Postby dave gangster » Tue Jan 16, 2018 6:41 am

Hi Randell will post pics when i cut it out. as yet only on aspire
dave gangster
Vectric Apprentice
 
Posts: 7
Joined: Wed Dec 02, 2015 7:56 am
Model of CNC Machine: Home made 3 axis 715mm x1mt

Re: Strat Fender help

Postby dave gangster » Sun Jan 28, 2018 8:32 am

Hi Randell, here are the pic's i promised plus one in lay job. thank again for your help Dave.
Attachments
20180120_102105.jpg
20180120_155227.jpg
20180120_160242.jpg
20180120_183826.jpg
20180120_183838.jpg
20180120_194110.jpg
dave gangster
Vectric Apprentice
 
Posts: 7
Joined: Wed Dec 02, 2015 7:56 am
Model of CNC Machine: Home made 3 axis 715mm x1mt

Re: Strat Fender help

Postby Rcnewcomb » Sun Jan 28, 2018 7:09 pm

Very nice. Thanks for the update.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3073
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC


Return to Aspire - General

Who is online

Users browsing this forum: No registered users and 12 guests