ASPIRE CAMP 2018 AT MCGREWS

This forum is for general discussion about Aspire

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby cabnet636 » Thu Apr 12, 2018 8:20 pm

Mezalik is coming in early to set up, come on
cabnet636
Vectric Wizard
 
Posts: 2580
Joined: Fri Dec 21, 2007 1:57 am
Location: columbia sc
Model of CNC Machine: CAMaster 508 ATC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby cabnet636 » Tue Apr 17, 2018 1:16 pm

Camp starts in 9 days and i had 5 call in to register today, please preregister....

Remember there are cash prizes for peoples choice show an tell this year
cabnet636
Vectric Wizard
 
Posts: 2580
Joined: Fri Dec 21, 2007 1:57 am
Location: columbia sc
Model of CNC Machine: CAMaster 508 ATC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby mezalick » Wed Apr 18, 2018 9:03 pm

Weather looks to be perfect..
~M
Attachments
weather.JPG
Michael Mezalick
https://carveddetails.com/catalog-book/
mm@mezalick.com
User avatar
mezalick
Vectric Wizard
 
Posts: 2376
Joined: Mon Nov 03, 2008 9:07 am
Location: Philadelphia, PA USA
Model of CNC Machine: Camaster Cobra

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby RebeccaJ » Fri Apr 20, 2018 8:19 am

Great news on the weather front! Myself and Todd are very much looking forward to the event! :)
Beki Jeremy
Senior Application Engineer - Vectric Ltd.
RebeccaJ
Vectric Staff
 
Posts: 134
Joined: Fri Jun 01, 2012 1:30 pm
Location: Redditch, UK
Model of CNC Machine: Various

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Todd Bailey » Tue Apr 24, 2018 12:52 pm

This should be a great event!!!

Can't wait to met everyone!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
User avatar
Todd Bailey
Vectric Staff
 
Posts: 153
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby cabnet636 » Tue Apr 24, 2018 1:57 pm

Temps in the mid 70s , when we scedule we look for three things,

One) do not compete with Mothers day,

Two) do not compete with the Masters Golf tournament

Three not too cold not to hot,,

It is a great time to be in Couth Carolina

Looking forward to my new friends and a lot of Old ones !!
cabnet636
Vectric Wizard
 
Posts: 2580
Joined: Fri Dec 21, 2007 1:57 am
Location: columbia sc
Model of CNC Machine: CAMaster 508 ATC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby roy_okc » Tue Apr 24, 2018 6:47 pm

On the road. Looking forward to my first trip to SC and Aspire Camp.
roy_okc
Vectric Craftsman
 
Posts: 108
Joined: Mon Sep 19, 2011 12:02 am
Location: Moore, OK, USA
Model of CNC Machine: DIY 80/20 ~18"x48", Mach 3

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby mezalick » Wed Apr 25, 2018 10:59 am

And so the journey begins..
Safe travels to all how will be attending the Camp..
See you soon,
Best regards,
Michael
Michael Mezalick
https://carveddetails.com/catalog-book/
mm@mezalick.com
User avatar
mezalick
Vectric Wizard
 
Posts: 2376
Joined: Mon Nov 03, 2008 9:07 am
Location: Philadelphia, PA USA
Model of CNC Machine: Camaster Cobra

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Todd Bailey » Wed Apr 25, 2018 12:30 pm

I'm going to need the help of the Attendees to come up with a fresh new Design and Make Hack of the Week... No.175 to be exact!

On Friday I'll be asking for your help in developing the theme for the next hack... if you have any ideas be sure to jot them down and get ready to share them with the group. You never know the next Hack of the Week just might be what you have been wanting!

If you not going to be at the event in person, feel free to leave them here and I'll check Friday in the AM for any ideas.

This should be fun!!!!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
User avatar
Todd Bailey
Vectric Staff
 
Posts: 153
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Rcnewcomb » Wed Apr 25, 2018 5:57 pm

I'm arriving late tonight (after 11PM). I'm staying at the Red Roof Inn. Is there some place and time I could meet with someone at the Red Roof Inn to get a ride over to Jim's shop on Thursday morning?
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3031
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Rcnewcomb » Thu Apr 26, 2018 4:27 pm

It has begun
Attachments
IMG_2884.JPG
IMG_2887.JPG
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3031
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Rcnewcomb » Fri Apr 27, 2018 9:28 pm

Bowl tutorial
Attachments
IMG_2896.JPG
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3031
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Todd Bailey » Sat Apr 28, 2018 1:55 am

Thanks to the help of the attendees at the camp we came up with Hack of the Week No.175...

We had all sorts of idea tabled and ended up settling on "camping".

This Hack of the Week will soon be available in the Design and Make store and like the hack, we developed at the 2017 Vectric Usergroup meeting we will be having a bit of a challenge... Keep an eye on the D&M newsletter for all the details!
Attachments
Hack of the Week No.175.png
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
User avatar
Todd Bailey
Vectric Staff
 
Posts: 153
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby CarveOne » Sat Apr 28, 2018 1:08 pm

Sitting here feeling like I am on a drug rehab program at home ... :(

Missed the lack of a McGrew Aspire camp last year, and not there this time for other reasons. Hope that you all are having a very good time.

CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
CarveOne
Vectric Wizard
 
Posts: 1232
Joined: Sun Nov 28, 2010 5:10 pm
Location: Eastern NC, USA
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby scubanimal » Sat Apr 28, 2018 11:36 pm

My first time at Mcgrews, learned a lot in 3 days. Lots of great people, inspiring projects, good food and beginnings of hopefully lasting friendships.
Thank you to all the folks who helped make this happen, presented and shared their experience.
Ian Martin
User avatar
scubanimal
Vectric Apprentice
 
Posts: 102
Joined: Tue Mar 12, 2013 9:16 pm
Location: San Diego
Model of CNC Machine: Stinger1 24, Shark HD2 Pro, Aspire,

PreviousNext

Return to Aspire - General

Who is online

Users browsing this forum: mark-s and 13 guests