ASPIRE CAMP 2018 AT MCGREWS

This forum is for general discussion about Aspire

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Rcnewcomb » Mon Mar 19, 2018 7:23 pm

Is there someone with a rotary who will be attending McGrew's camp? I'd like some examples cut. I can supply the files. I can compensate you for bits and materials. You would be responsible for cutting them and bringing them to the camp.

Most pieces would be 1.5" dia by 12" long. One piece that is 3.5" dia by 24" long would be nice if you machine can handle that.

Please respond here, on PM, or email me at randall at 222artisans dot com
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3040
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby 309cnc » Mon Mar 19, 2018 8:49 pm

cabnet636 wrote:We have some seats left but not many, looking forward to this one !!


Any openings left? Thx
309cnc
 
Posts: 9
Joined: Tue Jan 30, 2018 5:45 pm
Location: Dunlap, IL 61525
Model of CNC Machine: Axiom

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby mezalick » Mon Mar 19, 2018 8:57 pm

Yep. only a few seats left..


Michael
Michael Mezalick
https://carveddetails.com/catalog-book/
mm@mezalick.com
User avatar
mezalick
Vectric Wizard
 
Posts: 2377
Joined: Mon Nov 03, 2008 9:07 am
Location: Philadelphia, PA USA
Model of CNC Machine: Camaster Cobra

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby scubanimal » Mon Mar 19, 2018 9:21 pm

Rcnewcomb wrote:Is there someone with a rotary who will be attending McGrew's camp? I'd like some examples cut. I can supply the files. I can compensate you for bits and materials. You would be responsible for cutting them and bringing them to the camp.

Most pieces would be 1.5" dia by 12" long. One piece that is 3.5" dia by 24" long would be nice if you machine can handle that.

Please respond here, on PM, or email me at randall at 222artisans dot com



- email sent.
User avatar
scubanimal
Vectric Apprentice
 
Posts: 102
Joined: Tue Mar 12, 2013 9:16 pm
Location: San Diego
Model of CNC Machine: Stinger1 24, Shark HD2 Pro, Aspire,

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby cabnet636 » Fri Mar 23, 2018 2:11 pm

I have a few seats left if anyone wants to attend now is the time camp is well filled this year !!

Remember Bring yer Show and tell there is a vote which will pay for the winner !!
cabnet636
Vectric Wizard
 
Posts: 2580
Joined: Fri Dec 21, 2007 1:57 am
Location: columbia sc
Model of CNC Machine: CAMaster 508 ATC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Rcnewcomb » Fri Mar 23, 2018 7:11 pm

Thanks for those who have stepped up to cut some rotary samples for the camp. I'll work on the files this weekend and post them on a Google drive for you to cut them.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3040
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby cabnet636 » Fri Mar 23, 2018 7:55 pm

ShopBot, Camaster and Axiom are bringing machines,, all should have rotarys as well
cabnet636
Vectric Wizard
 
Posts: 2580
Joined: Fri Dec 21, 2007 1:57 am
Location: columbia sc
Model of CNC Machine: CAMaster 508 ATC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby Rcnewcomb » Sat Mar 24, 2018 10:04 pm

Just booked my flight.

Is anyone staying at the Red Roof Inn? Could I ride with you to go to McGrews?
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3040
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby smb315 » Sun Mar 25, 2018 6:05 pm

I am at the Red roof in Fort Jackson by two notch rd. You are welcome to ride with me. There are usually a few people staying there. Is that where you are staying?
smb315
 
Posts: 4
Joined: Sat Jun 25, 2011 2:27 pm
Model of CNC Machine: CAMASTER STINGER II 4 x 8

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby genej » Sat Mar 31, 2018 3:18 pm

I attended in 2015 and would love to come again, i just want to make sure i am reading correctly. It is $300 to register? Is there anyway to attend less than the 3 days?
Gene
genej
 
Posts: 4
Joined: Tue Sep 16, 2014 1:50 pm
Model of CNC Machine: K2 2436, Techno Davinci

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby JackS » Wed Apr 04, 2018 12:52 am

any openings still left?
JackS
 
Posts: 2
Joined: Fri Mar 17, 2017 6:39 pm
Model of CNC Machine: SenFeng 1212

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby mezalick » Wed Apr 04, 2018 1:14 am

I think there's only a few seats left JackS...
It's best to sign up as soon as you can.

Michael
Michael Mezalick
https://carveddetails.com/catalog-book/
mm@mezalick.com
User avatar
mezalick
Vectric Wizard
 
Posts: 2377
Joined: Mon Nov 03, 2008 9:07 am
Location: Philadelphia, PA USA
Model of CNC Machine: Camaster Cobra

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby mezalick » Fri Apr 06, 2018 3:55 pm

genej wrote:I attended in 2015 and would love to come again, i just want to make sure i am reading correctly. It is $300 to register? Is there anyway to attend less than the 3 days?
Gene



Gene,
If you're interested in attending for less than the full 3 days, please contact Jim McGrew via email.

mcgrew636 at msn dot com


Thanks,
Michael
Michael Mezalick
https://carveddetails.com/catalog-book/
mm@mezalick.com
User avatar
mezalick
Vectric Wizard
 
Posts: 2377
Joined: Mon Nov 03, 2008 9:07 am
Location: Philadelphia, PA USA
Model of CNC Machine: Camaster Cobra

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby cabnet636 » Sun Apr 08, 2018 11:59 pm

Yes feel free to contact me.. the camp has shaped up really good this year
cabnet636
Vectric Wizard
 
Posts: 2580
Joined: Fri Dec 21, 2007 1:57 am
Location: columbia sc
Model of CNC Machine: CAMaster 508 ATC

Re: ASPIRE CAMP 2018 AT MCGREWS

Postby roy_okc » Thu Apr 12, 2018 7:13 pm

Do you need any help setting up the day prior? I'm not sure what time I can get into town, present plan is to include some camping on the way, perhaps in the Smoky Mtns, but guessing that I could be there by early or mid afternoon to lend a strong(ish) back and weak mind.

Roy
roy_okc
Vectric Craftsman
 
Posts: 108
Joined: Mon Sep 19, 2011 12:02 am
Location: Moore, OK, USA
Model of CNC Machine: DIY 80/20 ~18"x48", Mach 3

PreviousNext

Return to Aspire - General

Who is online

Users browsing this forum: bigjwt, Google [Bot] and 16 guests