ASPIRE CAMP 2018 AT MCGREWS
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Mezalik is coming in early to set up, come on
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Camp starts in 9 days and i had 5 call in to register today, please preregister....
Remember there are cash prizes for peoples choice show an tell this year
Remember there are cash prizes for peoples choice show an tell this year
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Weather looks to be perfect..
~M
~M
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
-
- Vectric Staff
- Posts: 338
- Joined: Fri Jun 01, 2012 1:30 pm
- Model of CNC Machine: Various
- Location: Redditch, UK
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Great news on the weather front! Myself and Todd are very much looking forward to the event!
Beki
Senior Application Engineer - Vectric Ltd.
Senior Application Engineer - Vectric Ltd.
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
This should be a great event!!!
Can't wait to met everyone!
Can't wait to met everyone!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Temps in the mid 70s , when we scedule we look for three things,
One) do not compete with Mothers day,
Two) do not compete with the Masters Golf tournament
Three not too cold not to hot,,
It is a great time to be in Couth Carolina
Looking forward to my new friends and a lot of Old ones !!
One) do not compete with Mothers day,
Two) do not compete with the Masters Golf tournament
Three not too cold not to hot,,
It is a great time to be in Couth Carolina
Looking forward to my new friends and a lot of Old ones !!
-
- Vectric Craftsman
- Posts: 118
- Joined: Mon Sep 19, 2011 12:02 am
- Model of CNC Machine: DIY 80/20 ~18"x48", Mach 3
- Location: Moore, OK, USA
Re: ASPIRE CAMP 2018 AT MCGREWS
On the road. Looking forward to my first trip to SC and Aspire Camp.
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
And so the journey begins..
Safe travels to all how will be attending the Camp..
See you soon,
Best regards,
Michael
Safe travels to all how will be attending the Camp..
See you soon,
Best regards,
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
I'm going to need the help of the Attendees to come up with a fresh new Design and Make Hack of the Week... No.175 to be exact!
On Friday I'll be asking for your help in developing the theme for the next hack... if you have any ideas be sure to jot them down and get ready to share them with the group. You never know the next Hack of the Week just might be what you have been wanting!
If you not going to be at the event in person, feel free to leave them here and I'll check Friday in the AM for any ideas.
This should be fun!!!!
On Friday I'll be asking for your help in developing the theme for the next hack... if you have any ideas be sure to jot them down and get ready to share them with the group. You never know the next Hack of the Week just might be what you have been wanting!
If you not going to be at the event in person, feel free to leave them here and I'll check Friday in the AM for any ideas.
This should be fun!!!!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
I'm arriving late tonight (after 11PM). I'm staying at the Red Roof Inn. Is there some place and time I could meet with someone at the Red Roof Inn to get a ride over to Jim's shop on Thursday morning?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
It has begun
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Bowl tutorial
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Thanks to the help of the attendees at the camp we came up with Hack of the Week No.175...
We had all sorts of idea tabled and ended up settling on "camping".
This Hack of the Week will soon be available in the Design and Make store and like the hack, we developed at the 2017 Vectric Usergroup meeting we will be having a bit of a challenge... Keep an eye on the D&M newsletter for all the details!
We had all sorts of idea tabled and ended up settling on "camping".
This Hack of the Week will soon be available in the Design and Make store and like the hack, we developed at the 2017 Vectric Usergroup meeting we will be having a bit of a challenge... Keep an eye on the D&M newsletter for all the details!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: ASPIRE CAMP 2018 AT MCGREWS
Sitting here feeling like I am on a drug rehab program at home ...
Missed the lack of a McGrew Aspire camp last year, and not there this time for other reasons. Hope that you all are having a very good time.
CarveOne
Missed the lack of a McGrew Aspire camp last year, and not there this time for other reasons. Hope that you all are having a very good time.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
- scubanimal
- Vectric Craftsman
- Posts: 152
- Joined: Tue Mar 12, 2013 9:16 pm
- Model of CNC Machine: Stinger1 24, Shark HD2 Pro, Aspire,
- Location: San Diego
Re: ASPIRE CAMP 2018 AT MCGREWS
My first time at Mcgrews, learned a lot in 3 days. Lots of great people, inspiring projects, good food and beginnings of hopefully lasting friendships.
Thank you to all the folks who helped make this happen, presented and shared their experience.
Ian Martin
Thank you to all the folks who helped make this happen, presented and shared their experience.
Ian Martin