ASPIRE CAMP 2018 AT MCGREWS
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
ASPIRE CAMP 2018 AT MCGREWS
READY TO DO IT AGAIN, LAST YEAR I HAD SOME KNEE REPLACEMENTS AND AM READY TO HAVE SOME FUN..
For those new ask questions for the hundreds who have attended over the last ten years Bring it on !
This Year We are having a ticket vote for best show and tell so bring yer projects, remember even the simplest matter !
For those new ask questions for the hundreds who have attended over the last ten years Bring it on !
This Year We are having a ticket vote for best show and tell so bring yer projects, remember even the simplest matter !
- Attachments
-
- aspire registration 2018.pdf
- (243.69 KiB) Downloaded 785 times
-
- 2018 Aspire Camp agenda-V3.pdf
- (265.33 KiB) Downloaded 691 times
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
A small correction to the Registration form.
The dates of the camp are...
Thursday April 26 thru April 28, 2018
Thanks,
Michael
The dates of the camp are...
Thursday April 26 thru April 28, 2018
Thanks,
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
DATES ARE APRIL 26-28 WILL CORRECT ON FORM LATER
YOU CAN REGISTER BY SENDING NEEDED INFO BY EMAIL TO mcgrew636@msn.com
Info is on registration form
YOU CAN REGISTER BY SENDING NEEDED INFO BY EMAIL TO mcgrew636@msn.com
Info is on registration form
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Excellent first day signup,, this will fill quick.
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Hotels
by interstate, near heavy shopping Harbison
Hilton Garden Inn Columbia/Harbison
434 Columbiana Drive
Columbia, SC, 29212
American Inn St. Andrews
1337 Garner Lane
Columbia, SC, 29210
Comfort Inn Columbia
911 Bush River Road, Columbia, SC 29210
Some have stayed at the Red roof in on Two Notch road
Red Roof Inn Columbia East Ft Jackson
7580 Two Notch Road, Columbia, SC 29223
and in the Vista, walk to food bars etc.
Hilton Columbia Center
924 Senate Street
Columbia, SC 29201
Phone: 803-744-7800
Fax: 803-744-7777
Tollfree: 800-HILTONS
SpringHill Suites by Marriott-Columbia Downtown/The Vista
511 Lady Street
Columbia, SC, 29201
Hyatt Place Columbia/Downtown/Vista
819 Gervais Street
Columbia, SC, 29201
Columbia Marriott Hotel
1200 Hampton Street
Columbia, SC, 29201
CVB SITE
http://www.columbiacvb.com/hotels/
by interstate, near heavy shopping Harbison
Hilton Garden Inn Columbia/Harbison
434 Columbiana Drive
Columbia, SC, 29212
American Inn St. Andrews
1337 Garner Lane
Columbia, SC, 29210
Comfort Inn Columbia
911 Bush River Road, Columbia, SC 29210
Some have stayed at the Red roof in on Two Notch road
Red Roof Inn Columbia East Ft Jackson
7580 Two Notch Road, Columbia, SC 29223
and in the Vista, walk to food bars etc.
Hilton Columbia Center
924 Senate Street
Columbia, SC 29201
Phone: 803-744-7800
Fax: 803-744-7777
Tollfree: 800-HILTONS
SpringHill Suites by Marriott-Columbia Downtown/The Vista
511 Lady Street
Columbia, SC, 29201
Hyatt Place Columbia/Downtown/Vista
819 Gervais Street
Columbia, SC, 29201
Columbia Marriott Hotel
1200 Hampton Street
Columbia, SC, 29201
CVB SITE
http://www.columbiacvb.com/hotels/
-
- Vectric Alumni
- Posts: 12
- Joined: Wed Mar 22, 2017 11:44 am
- Model of CNC Machine: none
Re: ASPIRE CAMP 2018 AT MCGREWS
Vectric are so pleased that Jim's Aspire Camp is back after a year out. We will be there to help Jim, Michael & Co to deliver another great event.
Chris Lawrie | Commercial Director | Vectric Team
www.vectric.com
www.vectric.com
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Thanks Chris. looking forward to it,, registrations are well underway and expect a full house, I have changed the refunds to as needed like in previous years as life does throw curves.
- Attachments
-
- aspire registration 2018.pdf
- (243.61 KiB) Downloaded 275 times
Re: ASPIRE CAMP 2018 AT MCGREWS
Good morning, I have been reading about your Aspire Camp and extremely happy to see that y’all will be putting one on this year. I read some of the past years outlines for the camp and noticed that y’all have had a lot about the rotary but noticed that it wasn’t covered this year. I was wondering if that will be covered at all. I currently run a cam master stinger 2 with a recoil lathe but have never used it because I’ve never had proper training on it and that was something I’d be very interested in as well as all of the other things y’all will discuss in the camp. So I guess my question is will there be any rotary instruction at this years camp or will there be a chance that I can speak with someone about setup of a rotary and using it properly. Thanks
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Ramecyc1,
The current agenda is always up for changes,,,but in the worst case, there will be several people, well versed in the rotary operations, that can give you some advice...
I bet even the folks from Vectric will want to chime in on that..
Hope to see you there.
Michael
The current agenda is always up for changes,,,but in the worst case, there will be several people, well versed in the rotary operations, that can give you some advice...
I bet even the folks from Vectric will want to chime in on that..
Hope to see you there.
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
-
- Vectric Alumni
- Posts: 12
- Joined: Wed Mar 22, 2017 11:44 am
- Model of CNC Machine: none
Re: ASPIRE CAMP 2018 AT MCGREWS
Hi Michael
I will discuss with Beki, but I am confident we will have something on Rotary.
Thanks
Chris
I will discuss with Beki, but I am confident we will have something on Rotary.
Thanks
Chris
Chris Lawrie | Commercial Director | Vectric Team
www.vectric.com
www.vectric.com
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
I will be there and will gladly have a conversation with you and others interested in rotary. I started working with rotary and Aspire 8 years ago.ill there be a chance that I can speak with someone about setup of a rotary and using it properly
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Questions,
Who else out there would like to learn about the rotary possibilities ???
And are you attending the Camp at Jim McGrew's in April ??
Michael
Who else out there would like to learn about the rotary possibilities ???
And are you attending the Camp at Jim McGrew's in April ??
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
-
- Vectric Craftsman
- Posts: 208
- Joined: Sun Jan 26, 2014 12:59 pm
- Model of CNC Machine: CAMMaster Stinger II
- Location: Romney, WV
Re: ASPIRE CAMP 2018 AT MCGREWS
Interested in rotary and will attend the camp.
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: ASPIRE CAMP 2018 AT MCGREWS
Camp is booking well and Mezalik has asked for interest in discussing the Rotary so it looks like that will happen, I am sure many of the 1075 who have attended over the years will tell anyone who wants to know the value of the Camp whether it is your first or tenth !