there are many images out there but not great of iwo-jima
looking for a GOOD stl or a GOOD png file of the Iwo-Jima flag raising
something to cut with a cnc
thank you
andy
iwo-jima iamge
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: iwo-jima iamge
Do you want to v-carve the image or were you looking to do more of a 2.5d?
John
Maker of Chips
Maker of Chips
-
- Vectric Craftsman
- Posts: 240
- Joined: Sun May 15, 2011 4:19 pm
- Model of CNC Machine: Camaster Stinger II
Re: iwo-jima iamge
Try these - -not entirely accurate - my flag has too many stars, but most don't notice
https://www.dropbox.com/l/scl/AABhmJZhZ ... 7hiT5qzGDg
https://www.dropbox.com/l/scl/AAAi-WF7S ... an-Pu8xnyk
https://www.dropbox.com/l/scl/AABhmJZhZ ... 7hiT5qzGDg
https://www.dropbox.com/l/scl/AAAi-WF7S ... an-Pu8xnyk
Re: iwo-jima iamge
preferably 2.5highpockets wrote:Do you want to v-carve the image or were you looking to do more of a 2.5d?
looking for a 3d version I can rough out and then finish
-
- Vectric Craftsman
- Posts: 240
- Joined: Sun May 15, 2011 4:19 pm
- Model of CNC Machine: Camaster Stinger II
Re: iwo-jima iamge
https://www.dropbox.com/sh/ez9prfkiabrg ... hNBLa?dl=0
There are two files in the dropbox - 7x9 - courage IWO JIMA MEMORIAL .3dClip - and - iwo.stl
The following pic shows how I carve it but the files are the men and flag only. I think the 3dclip is a better format, the stl is what spire creates in an export.
Use the files as you wish -
I have also attached the stl - it was small enough, the 3dCLIP is 12.5meg
There are two files in the dropbox - 7x9 - courage IWO JIMA MEMORIAL .3dClip - and - iwo.stl
The following pic shows how I carve it but the files are the men and flag only. I think the 3dclip is a better format, the stl is what spire creates in an export.
Use the files as you wish -
I have also attached the stl - it was small enough, the 3dCLIP is 12.5meg
- Attachments
-
- iwo.zip
- (1.92 MiB) Downloaded 149 times
Re: iwo-jima iamge
Pete Cyr wrote:https://www.dropbox.com/sh/ez9prfkiabrg ... hNBLa?dl=0
There are two files in the dropbox - 7x9 - courage IWO JIMA MEMORIAL .3dClip - and - iwo.stl
The following pic shows how I carve it but the files are the men and flag only. I think the 3dclip is a better format, the stl is what spire creates in an export.
Use the files as you wish -
I have also attached the stl - it was small enough, the 3dCLIP is 12.5meg
thank you so much
-
- Vectric Craftsman
- Posts: 240
- Joined: Sun May 15, 2011 4:19 pm
- Model of CNC Machine: Camaster Stinger II
Re: iwo-jima iamge
Your welcome.