2 sided machining not going full depth

This forum is for general discussion about Aspire

2 sided machining not going full depth

Postby Wayne Locke » Mon Oct 30, 2017 7:58 pm

I am about to ram my head through he computer screen. What am I missing? I have a 2 sided chair seat which is 1.75" thick. The model looks great on both sides but the tool path will not go to the bottom. The z zero is to the center.
Wayne Locke
 
Posts: 18
Joined: Wed May 09, 2007 9:27 pm
Location: Austin, Texas

Re: 2 sided machining not going full depth

Postby BernieNUFC » Mon Oct 30, 2017 9:00 pm

I dont have aspire but i had not a too dissimilar issue in my post here, check Rebecca's reply, sorry if its nowt like your issue :-)

viewtopic.php?f=2&t=27835&p=201712#p201712
VCarve Pro v9.010
High-Zs 720- Kress 1050 router ( CNC-Step DE version)
BernieNUFC
Vectric Apprentice
 
Posts: 81
Joined: Fri Apr 10, 2015 5:36 pm
Location: Haltwhistle, Northumberland, UK
Model of CNC Machine: High-Z S-720

Re: 2 sided machining not going full depth

Postby garylmast » Mon Oct 30, 2017 9:42 pm

If you import a 3D model, determine how much you want to undercut and add that positive number into the zero plane position in the model. If you don't have a zero plane add one and under properties put it as a negative height. Offset the toolpath the radius of the mills. Gary
Attachments
undercut.jpg
garylmast
Vectric Wizard
 
Posts: 569
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah


Return to Aspire - General

Who is online

Users browsing this forum: No registered users and 16 guests