Radius All Corners Bug
Radius All Corners Bug
I was drawing a design and used the Radius All Corners Gadget. It worked just fine except the corners were more than I wanted. I tried to Undo it but it would not let me. I had to redraw all the vectors again, which took awhile. This time I copied the vectors before I used the gadget, which was still more than I wanted, but I was able to delete the vectors and paste it. I hope the bug can be fixed, because my memory is only about 30-seconds, and I know I'll forget to copy and have to redraw everything again if I use the gadget again. I'm using the Aspire V. 9.010. Gary
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Re: Radius All Corners Bug
Hi,
This is not a bug as such, it has always been a limitation of ALL gadgets that they don't work with the undo mechanism as they operate at a very low level in the program when creating geometry etc.
Brian
This is not a bug as such, it has always been a limitation of ALL gadgets that they don't work with the undo mechanism as they operate at a very low level in the program when creating geometry etc.
Brian
- Adrian
- Vectric Archimage
- Posts: 14657
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Radius All Corners Bug
The gadget has the (default) option of creating the radiused vectors on a new layer. If you always use that then you won't lose your starting vectors.
Re: Radius All Corners Bug
Thanks for the reply. Gary