I had a customer contact me and request a small sign titled Wild Beak Buffet. I am at a loss as to do. Birds ........??
Any suggestions are of great value at this point.
Thanks Kathy
needing ideas
-
- Vectric Craftsman
- Posts: 184
- Joined: Mon Apr 16, 2012 3:14 am
- Model of CNC Machine: Cam Master StingerII
- Location: Tonasket Washington
- Contact:
needing ideas
Camaster StingerII - FTC, Vac Table - Aspire
Embroidery - WingsXP
Embroidery - WingsXP
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: needing ideas
I'm assuming we're talking about bird beaks and not a Jimmy Durante "beak" .
Look at Design & Make they have several great bird beak models, mainly eagles.
Look at Design & Make they have several great bird beak models, mainly eagles.
John
Maker of Chips
Maker of Chips
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: needing ideas
Have you spoken with your customer about this? It's their business so how do they see it ?
If you speak with the customer & ask them what they like/dislike then you can often get a good idea what direction to take & their is a better chance that they will like what you come up with
Just my opinion but I believe that the customer should have some input into the design of a sign for their Business, after all they are the ones that have to live with it once it is done
I normally ask a series of questions to help me get a better idea of what they really want.
If you speak with the customer & ask them what they like/dislike then you can often get a good idea what direction to take & their is a better chance that they will like what you come up with
Just my opinion but I believe that the customer should have some input into the design of a sign for their Business, after all they are the ones that have to live with it once it is done
I normally ask a series of questions to help me get a better idea of what they really want.
-
- Vectric Craftsman
- Posts: 184
- Joined: Mon Apr 16, 2012 3:14 am
- Model of CNC Machine: Cam Master StingerII
- Location: Tonasket Washington
- Contact:
Re: needing ideas
Verry funnnnny Highpockets. Made me laugh this am.
Thanks, a gpod way to start the day.
Kathy
Thanks, a gpod way to start the day.
Kathy
Camaster StingerII - FTC, Vac Table - Aspire
Embroidery - WingsXP
Embroidery - WingsXP
- ChiloquinRuss
- Vectric Craftsman
- Posts: 174
- Joined: Mon Jan 28, 2008 3:58 am
- Model of CNC Machine: 2008 48x96 ShopBot spindle and Aspire
- Location: Chiloquin, Oregon
Re: needing ideas
When stuck I take a look at all of the collateral documents that the customer uses to describe their business. I have used menus, business cards, websites, etc. They must call the buffet that name for a reason, find out why they do. This may break your deadlock. Russ
AKA: The Train Guy!