Is there any way to set the toolpath color standard choices?
PLEASE could you allow custom setting, or at least one?
Currently the 3 (hex values) are 960000, 009600 and 000096
I use a dark brown (75,25,0) for nearly every design, and it takes so much time to select a toolpath, choose more colors, go to custom tab, type in the hex values, sometimes several times during a project.
Maybe in settings, you could allow them to be editable?
Many thanks,
David
Toolpath Color
- Adrian
- Vectric Archimage
- Posts: 14651
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Toolpath Color
It would be good if they could be set as defaults I agree.
One thing that might help you a bit now is to use a toolpath template as the toolpath colour is stored as part of them. I very rarely create a toolpath from scratch these days. I just load a template toolpath that fits what I'm doing and I know every setting is correct that way.
One thing that might help you a bit now is to use a toolpath template as the toolpath colour is stored as part of them. I very rarely create a toolpath from scratch these days. I just load a template toolpath that fits what I'm doing and I know every setting is correct that way.
Re: Toolpath Color
Thanks Adrian for the tip. I'll give the template method a try.
I've created around 8,000 files since Aspire first was launched and that adds up to around a day setting custom color at 10 seconds a pop.
Would be worth the price of an upgrade just for that!
I've created around 8,000 files since Aspire first was launched and that adds up to around a day setting custom color at 10 seconds a pop.
Would be worth the price of an upgrade just for that!