Anomaly in V9

This forum is for general discussion about Aspire

Anomaly in V9

Postby highpockets » Wed Jul 26, 2017 6:17 am

Can someone else with Aspire v9 try this and see what happens?

Open a project in Aspire v9. Double click on the Layers area at the top of the menu bar.
Image 007.png


Also try opening the Layers list then clicking in a blank are of the top menu bar.
Image 008.png


What happens?
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1275
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Anomaly in V9

Postby Adrian » Wed Jul 26, 2017 7:02 am

Nothing happens for me. Have you upgraded to 9.008?
User avatar
Adrian
Vectric Archimage
 
Posts: 7404
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Anomaly in V9

Postby piccyman2 » Wed Jul 26, 2017 7:09 am

I have just tried it and no problem, can you write down the exact steps you took to get the problem
piccyman2
 
Posts: 15
Joined: Sat Apr 11, 2015 9:13 am
Model of CNC Machine: home made

Re: Anomaly in V9

Postby highpockets » Wed Jul 26, 2017 3:03 pm

Adrian wrote:Nothing happens for me. Have you upgraded to 9.008?


piccyman2 wrote:I have just tried it and no problem, can you write down the exact steps you took to get the problem


Yes I have 9.008.

I've contacted support and it seems the issue must be on my computer, they can't replicate the problem either. Strange though, I've never had this problem before installing V9 on Aspire or any other app on my computer. And only Aspire v9 has this issue.

Thanks for your help.
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1275
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Anomaly in V9

Postby Adrian » Wed Jul 26, 2017 3:07 pm

What's actually happening?
User avatar
Adrian
Vectric Archimage
 
Posts: 7404
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Anomaly in V9

Postby dealguy11 » Wed Jul 26, 2017 4:02 pm

On my computer it's minimizing Aspire and changing focus to another open program. This is behavior I've seen before. When I double click in the area Highpockets indicated, Aspire is immediately minimized and focus goes to another program.
Steve Godding
D&S Artistic Woodworking http://www.dsartisticwood.com
User avatar
dealguy11
Vectric Wizard
 
Posts: 1150
Joined: Tue Sep 22, 2009 9:52 pm
Location: Henryville, PA
Model of CNC Machine: Anderson Selexx 510

Re: Anomaly in V9

Postby highpockets » Wed Jul 26, 2017 5:39 pm

dealguy11 wrote:On my computer it's minimizing Aspire and changing focus to another open program. This is behavior I've seen before. When I double click in the area Highpockets indicated, Aspire is immediately minimized and focus goes to another program.


Wahoo.gif

I'm not the only one!!!!
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1275
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Anomaly in V9

Postby ohiolyons » Wed Jul 26, 2017 6:48 pm

Don't you just hate it when you're the only one!!!
John
CNC in Kettering, Ohio
ohiolyons
Vectric Craftsman
 
Posts: 198
Joined: Wed May 27, 2009 7:16 pm
Location: Kettering, Ohio
Model of CNC Machine: Laguna IQ HHC, 3HP

Re: Anomaly in V9

Postby Desert_Woodworker » Wed Jul 26, 2017 7:17 pm

I just checked mine, I tried it with one sided then switched to 2 sided on the job set up. It works fine for me.
Desert_Woodworker
Vectric Apprentice
 
Posts: 64
Joined: Sun Feb 28, 2016 5:48 pm
Location: Arizona
Model of CNC Machine: Laguna IQ

Re: Anomaly in V9

Postby Rcnewcomb » Wed Jul 26, 2017 7:25 pm

No issue on my system.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 2684
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: Shopbot, CAMaster

Re: Anomaly in V9

Postby Bill_L » Wed Jul 26, 2017 8:18 pm

Finally got around to trying this on mine and everything appears to work fine.

Bill
Bill_L
Vectric Apprentice
 
Posts: 56
Joined: Tue Jan 24, 2006 11:57 am
Location: Imperial, PA USA

Re: Anomaly in V9

Postby dealguy11 » Wed Jul 26, 2017 8:23 pm

This happens often on my system, generally at random. At least Highpockets' approach is repeatable...I haven't been able to get it to repeat up until now. I'm laying out doors today and the frequency of it is getting annoying.
Steve Godding
D&S Artistic Woodworking http://www.dsartisticwood.com
User avatar
dealguy11
Vectric Wizard
 
Posts: 1150
Joined: Tue Sep 22, 2009 9:52 pm
Location: Henryville, PA
Model of CNC Machine: Anderson Selexx 510

Re: Anomaly in V9

Postby Rcnewcomb » Wed Jul 26, 2017 8:46 pm

Steve and John,

Under Edit/Options, in the General Settings, is "Use graphics tablet" set to Yes or No? Do you have a Wacom or similar device attached?
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 2684
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: Shopbot, CAMaster

Re: Anomaly in V9

Postby highpockets » Wed Jul 26, 2017 8:52 pm

Randall,

Mine was set to Yes so I changed it to No and test. No change. I even tried restarting Aspire.

I do not have a Wacom or other such device.

Thanks for the suggestion.
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1275
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Anomaly in V9

Postby martin54 » Wed Jul 26, 2017 9:28 pm

what version of windows are you running John ? Someone told me that Microsoft edge was responsible for a lot of their software problems (not vectric software though), I don't know how true that is as the guy is not a computer expert. I haven't had any problems myself & can't recreate your problem on my system :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 3277
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Next

Return to Aspire - General

Who is online

Users browsing this forum: Bing [Bot] and 19 guests