I am trying to make a simple frame using a moulding profile. I have done this previously but with this particular profile, I cannot for the life of me get it to work. It should be relatively simple and I even went back and watch the Vectric Moulding video and tried it with his frame example and it wouldn't work there either.
I would appreciate it if someone would take a look at this and see what I am doing wrong. If you can get it working please explain what you did and upload the correct file for the example so I can learn from it.
Help with Moulding Frame
Help with Moulding Frame
- Attachments
-
- Frame.crv3d
- (23.5 KiB) Downloaded 112 times
-
- Vectric Wizard
- Posts: 1717
- Joined: Sun Sep 23, 2012 12:14 pm
- Model of CNC Machine: CNC Shark Pro, Probotix Meteor 25" x 50"
Re: Help with Moulding Frame
Your profile needed to be just the top of the section view.
The interior rectangle needed to be an even offset of the outside perimeter by the width of the profile. 4D
The interior rectangle needed to be an even offset of the outside perimeter by the width of the profile. 4D
- Attachments
-
- Frame4D.crv3d
- (77 KiB) Downloaded 119 times
Re: Help with Moulding Frame
Thank you so much 4D. I knew it had to be something silly I was missing. I really appreciate it