Aspire 9

This forum is for general discussion about Aspire

Re: Aspire 9

Postby plcamp » Tue Jul 18, 2017 12:14 pm

Leo wrote:I will just be patient.

I am sure that Vectric has a LOT of money tied up in this release. I am sure that they NEED the money from an upgrade to cover their costs.

They have plenty of incentive to release it.

I have had software that needed repair plugs after release and I don't like that.

Vectric is going to release.

There has been NO release DATES to my knowledge - they are NOT past due on anything.

Patience - Patience.

Don't force Vectric into something that we will all regret afterwards.


Thank you Leo, well stated......
plcamp
Vectric Apprentice
 
Posts: 76
Joined: Sun Feb 05, 2012 4:40 am
Location: Fort Wayne, Indiana
Model of CNC Machine: Home built wooden machine - Mach3/Aspire

Re: Aspire 9

Postby BrianM » Tue Jul 18, 2017 2:40 pm

plcamp wrote:
Leo wrote:I will just be patient.

I am sure that Vectric has a LOT of money tied up in this release. I am sure that they NEED the money from an upgrade to cover their costs.

They have plenty of incentive to release it.

I have had software that needed repair plugs after release and I don't like that.

Vectric is going to release.

There has been NO release DATES to my knowledge - they are NOT past due on anything.

Patience - Patience.

Don't force Vectric into something that we will all regret afterwards.


Thank you Leo, well stated......


Thank you all for your patience. I can assure you that the staff at Vectric have been working extremely hard to get not just the program but the support materials, marketing materials and internal systems ready for this release.

However

viewtopic.php?f=27&t=27696


Thanks again

Brian
Brian Moran
Managing Director / CEO
Vectric Ltd.
User avatar
BrianM
Vectric Staff
 
Posts: 1937
Joined: Mon May 16, 2005 10:15 am
Location: Redditch U.K

Re: Aspire 9

Postby Leo » Tue Jul 18, 2017 2:56 pm

Just ONE more time ---- you guys are AWESOME
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2418
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

Re: Aspire 9

Postby joeporter » Tue Jul 18, 2017 3:36 pm

Thanks, Mark. Looking forward to seeing you-all (y'all in Southern) in Las Vegas this fall...joe
joeporter
Vectric Wizard
 
Posts: 395
Joined: Tue Jul 21, 2009 8:22 pm
Location: Marietta, GA.
Model of CNC Machine: ShopBot Buddy Standard

Re: Aspire 9

Postby joeporter » Tue Jul 18, 2017 4:00 pm

Just downloaded V9! Now to start a new project...joe
joeporter
Vectric Wizard
 
Posts: 395
Joined: Tue Jul 21, 2009 8:22 pm
Location: Marietta, GA.
Model of CNC Machine: ShopBot Buddy Standard

Re: Aspire 9

Postby Desert_Woodworker » Tue Jul 18, 2017 6:13 pm

Desert_Woodworker
Vectric Apprentice
 
Posts: 64
Joined: Sun Feb 28, 2016 5:48 pm
Location: Arizona
Model of CNC Machine: Laguna IQ

Re: Aspire 9

Postby vip-klaus » Tue Jul 18, 2017 6:25 pm

Hi all,

same question as allway: can I install Aspire 9.0 in parallel to the existing version 8.5? Maybe there are still som bugs ...

Greetings
Klaus
vip-klaus
 
Posts: 20
Joined: Sat Jan 12, 2013 1:01 pm
Location: Wurmberg, Germany
Model of CNC Machine: Wabeco F1410 LF-C HS; Sorotec AL1110

Re: Aspire 9

Postby Adrian » Tue Jul 18, 2017 6:39 pm

Yes you can install it alongside 8.5 with no interference. Hopefully there aren't any bugs, myself and the other beta testers have been trying hard for a while to find them all but you never know.
User avatar
Adrian
Vectric Archimage
 
Posts: 7411
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Aspire 9

Postby martin54 » Tue Jul 18, 2017 10:13 pm

vip-klaus wrote:Hi all,

same question as allway: can I install Aspire 9.0 in parallel to the existing version 8.5? Maybe there are still som bugs ...

Greetings
Klaus


Just remember that the software is not backward compatible so any files you have saved using V9 will not open in 8.5 :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 3277
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Re: Aspire 9

Postby Desert_Woodworker » Wed Jul 19, 2017 1:18 am

V9 For now I am trying the trial version- kudo's. My likes are similar to those above, especially the Layers location. On the dislikes side :cry: :( :cry: :cry: No additional clip art, added.
If we are too positive they might increase their already reasonabally priced upgrade of $400 (usd) Oh well......
Desert_Woodworker
Vectric Apprentice
 
Posts: 64
Joined: Sun Feb 28, 2016 5:48 pm
Location: Arizona
Model of CNC Machine: Laguna IQ

Re: Aspire 9

Postby IslaWW » Wed Jul 19, 2017 2:01 am

My downloads included nearly 50 MB of "V9" additional clipart
Gary Campbell
CNC Technology & Training
Control & ATC Retrofits
GCnC411 (at) gmail.com
User avatar
IslaWW
Vectric Wizard
 
Posts: 849
Joined: Wed Nov 21, 2007 11:42 pm
Location: Marquette, MI, USA
Model of CNC Machine: SideWinder ATC & CNC Mill on WinCNC

Re: Aspire 9

Postby dwilli9013 » Wed Jul 19, 2017 2:04 am

IslaWW wrote:My downloads included nearly 50 MB of "V9" additional clipart


+1 :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 830
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Aspire 9

Postby redwood » Wed Jul 19, 2017 7:17 am

Did that additional clip art come with the main install?
redwood
Vectric Craftsman
 
Posts: 148
Joined: Wed Apr 13, 2016 3:38 am
Location: No. Calif.
Model of CNC Machine: Axiom Pro6

Re: Aspire 9

Postby Adrian » Wed Jul 19, 2017 8:28 am

It's on the portal download page with all the other clipart and the main program.

Capture.JPG
User avatar
Adrian
Vectric Archimage
 
Posts: 7411
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Aspire 9

Postby blmac5 » Wed Jul 19, 2017 5:29 pm

I also did not see any additional clipart. On my portal download page, it has the V9 3D Tabs Clipart listed, but
does not show the V9 additional clipart as in the attachment that Adrian posted. I tried to post a picture of what
is available in my portal download page, but it will not let me. Am I missing something??
How can I get the additional clipart??

Bobby
blmac5
Vectric Apprentice
 
Posts: 58
Joined: Sun Nov 10, 2013 8:05 pm
Location: Louisiana
Model of CNC Machine: CAMaster Stinger 1

PreviousNext

Return to Aspire - General

Who is online

Users browsing this forum: No registered users and 15 guests