Model in a Dish - Summary PDF

[Mark's Wood Chips]

I made another PDF document summarizing the steps necessary to place a model in a dish shape then, using a multiply level, make sure that the model does not exceed the dish depth. It is meant to supplement the Vectric tutorial http://support.vectric.com/tutorials/V8 ... 3DMOD.html. I hope you find it useful.

Mark

[Beltramidave]

Thanks Mark!

[Dale1944]

Great work! Thanks.

[scottp55]

Thanks Mark!
I remember Dave(dah) had to use that to get a fish model to fit in his dish, and know there will come a time I'll need it.
Saved in my reference materials:)
scott

[highpockets]

Mark, thanks for taking the time to write this up and sharing. Good job!

[dwilli9013]

Thanks for this Mark. Filed for future reference when scratching my head.

[Mark's Wood Chips]

My pleasure to share. I make these summary documents even though Vectric has detailed video tutorials because I don't need to spend another 15 minutes re-running the video once I'm aware of the technique. A cheat sheet helps me a lot.

Mark