When using the Moulding toolpath on an open vector the clearance option ignores the Create Sharp Corners option when activated even though the final/finish pass does not. Close the vector and both work with Sharp Corners chosen. Limits the versatility of the Moulding toolpath.
Bug report: Swept Profile
-
4DThinker
- Vectric Wizard
- Posts: 1717
- Joined: Sun Sep 23, 2012 12:14 pm
- Model of CNC Machine: CNC Shark Pro, Probotix Meteor 25" x 50"
Bug report: Swept Profile
Version: 8.517 and earlier
When using the Moulding toolpath on an open vector the clearance option ignores the Create Sharp Corners option when activated even though the final/finish pass does not. Close the vector and both work with Sharp Corners chosen. Limits the versatility of the Moulding toolpath.
4D
When using the Moulding toolpath on an open vector the clearance option ignores the Create Sharp Corners option when activated even though the final/finish pass does not. Close the vector and both work with Sharp Corners chosen. Limits the versatility of the Moulding toolpath.
4D
-
flying_flip
- Vectric Apprentice
- Posts: 58
- Joined: Wed Feb 15, 2017 10:38 pm
- Model of CNC Machine: Piranha FX / VCarve Desktop
- Location: Tucson, Arizona
Re: Bug report: Swept Profile
Have you tried 3 separate vectors instead of Joined vector?
Phil
Phil