Down cut endmill
-
- Vectric Craftsman
- Posts: 218
- Joined: Fri Jul 11, 2014 3:45 pm
- Model of CNC Machine: ShopBot Desktop
Down cut endmill
Does anyone have a part number for a 1/16 inch DOWN CUT endmill?
- dealguy11
- Vectric Wizard
- Posts: 2497
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510,24x48 GCnC/WinCNC
- Location: Henryville, PA
Re: Down cut endmill
Google search gave me a whole bunch of them. There's one on this page from a supplier I use:
http://www.precisebits.com/products/car ... 2flute.asp
Here's another:
http://www.stewmac.com/Luthier_Tools/Ty ... _Bits.html
http://www.precisebits.com/products/car ... 2flute.asp
Here's another:
http://www.stewmac.com/Luthier_Tools/Ty ... _Bits.html
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost
-
- Vectric Craftsman
- Posts: 218
- Joined: Fri Jul 11, 2014 3:45 pm
- Model of CNC Machine: ShopBot Desktop
Re: Down cut endmill
Great. Thank you.
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Down cut endmill
These work great in hardwood and exotics, we use them for buttonholes and small stuff.
http://www.ebay.com/itm/1-16-0625-CARBI ... 2lDHTld7og
Oh, Very clean cuts and pocket bottoms, even on Ebony and squirrely stuff like Curly Maple.
http://www.ebay.com/itm/1-16-0625-CARBI ... 2lDHTld7og
Oh, Very clean cuts and pocket bottoms, even on Ebony and squirrely stuff like Curly Maple.
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
- Adrian
- Vectric Archimage
- Posts: 14690
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Down cut endmill
It's always worth trying a few brands as not all are made equal and what may seem cheap works out expensive when you take tool life into account.
- CrowsWW
- Vectric Craftsman
- Posts: 155
- Joined: Wed Jun 27, 2012 7:10 pm
- Model of CNC Machine: ShopSabre 4896
- Location: Palmer, Alaska USA
Re: Down cut endmill
I get most of my tools from these
https://www.vortextool.com/
http://www.southeasttool.com/
http://www.whitesiderouterbits.com/
https://www.vortextool.com/
http://www.southeasttool.com/
http://www.whitesiderouterbits.com/
Troy Crow
Crow's Woodwork's
I have a day job to support my wood habit!
Crow's Woodwork's
I have a day job to support my wood habit!