It's Finished!!!

This forum is for general discussion about Aspire

It's Finished!!!

Postby Warped Mind » Tue Jul 19, 2016 5:07 pm

I want to thank all of you who helped guide me through this wonderful learning experience. I was presented a challenge by my daughters band director to build a full life size replica of a Disney Model. All I had to go by was a photo and it was really fun and challenging for me. I now have a new respect for Aspire and CNC working together.
Attachments
snowwhite.jpg
the drawing
throne in process.jpg
The size is almost 9 feet tall
finished throne2.jpg
Complete
Warped Mind
Vectric Craftsman
 
Posts: 185
Joined: Thu Nov 21, 2013 9:10 pm
Location: York, SC
Model of CNC Machine: Laguna IQ

Re: IT'S FINISHED!!!

Postby Leo » Tue Jul 19, 2016 5:15 pm

WOW - what a fantastic job.

That is truly awesome
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2418
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

Re: IT'S FINISHED!!!

Postby NathanD » Tue Jul 19, 2016 5:18 pm

Absolutely outstanding, good work! I love the paint job too.
NathanD
Vectric Staff
 
Posts: 10
Joined: Mon Jun 13, 2016 8:19 am
Model of CNC Machine: N/A

Re: IT'S FINISHED!!!

Postby Warped Mind » Tue Jul 19, 2016 5:19 pm

Thanks, I believe they are going to be impressed, its much nicer than I thought it would turn out to be.
Warped Mind
Vectric Craftsman
 
Posts: 185
Joined: Thu Nov 21, 2013 9:10 pm
Location: York, SC
Model of CNC Machine: Laguna IQ

Re: IT'S FINISHED!!!

Postby martin54 » Tue Jul 19, 2016 8:49 pm

As Leo has already said WOW !!!!

I would have been ok with this project up to the point where it needed painting & then everything would have gone pear shaped :oops: :oops:

Unfortunately it's a skill that I don't poses but it looks like you have done a great job.

I am sure they will be impressed with it, I know I am :lol: :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 3277
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Re: IT'S FINISHED!!!

Postby dealguy11 » Tue Jul 19, 2016 11:30 pm

Extremely nice! I second (third? fourth?) the comments on the paint job - very well done. Thanks for sharing!
Steve Godding
D&S Artistic Woodworking http://www.dsartisticwood.com
User avatar
dealguy11
Vectric Wizard
 
Posts: 1150
Joined: Tue Sep 22, 2009 9:52 pm
Location: Henryville, PA
Model of CNC Machine: Anderson Selexx 510

Re: IT'S FINISHED!!!

Postby sailfl » Wed Jul 20, 2016 12:05 am

WOW is right. Excellent job. You just made it to the top of the Best Dad Ever list. Thank you for sharing your work.
sailfl
Vectric Wizard
 
Posts: 377
Joined: Sat Dec 15, 2007 3:46 pm
Location: Orlando, FL
Model of CNC Machine: MechMate

Re: IT'S FINISHED!!!

Postby Tundraman » Wed Jul 20, 2016 2:56 am

That is truly outstanding!!
What everyone else has said - and so on!
Pulling off the carving a assembly are great but the paint job puts it over the top!! :) :)
Congratulations,
Scott
Tundraman
Vectric Apprentice
 
Posts: 71
Joined: Wed Apr 08, 2015 2:37 am
Model of CNC Machine: Techno Isel 3'x4' Gantry III

Re: IT'S FINISHED!!!

Postby garylmast » Wed Jul 20, 2016 3:37 am

Wow, great job. Is someone going to dress up as the Queen and sit in it, or is that your next project?
garylmast
Vectric Wizard
 
Posts: 569
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: IT'S FINISHED!!!

Postby Warped Mind » Wed Jul 20, 2016 3:43 am

this is going to be used in this upcoming marching season, several different members of the color guard will be in it at different times during the performance, thanks for all the positive comments.
Warped Mind
Vectric Craftsman
 
Posts: 185
Joined: Thu Nov 21, 2013 9:10 pm
Location: York, SC
Model of CNC Machine: Laguna IQ

Re: It's Finished!!!

Postby Ms Wolffie » Thu Jul 21, 2016 1:50 pm

SSSHHHH
Don't tell Disney :lol:
Cheers
Wolffie

Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
User avatar
Ms Wolffie
Vectric Wizard
 
Posts: 2652
Joined: Sat Mar 31, 2012 10:41 pm
Location: Tully Heads, Wet Tropics, Queensland, Australia
Model of CNC Machine: SharkPro+HD Heavily modified

Re: It's Finished!!!

Postby angelandthebear » Thu Jul 21, 2016 9:42 pm

Wow that is coolness to a whole new level!!! :mrgreen:
angelandthebear
 
Posts: 44
Joined: Wed Aug 12, 2015 10:01 pm
Model of CNC Machine: ShopBot Desktop

Re: It's Finished!!!

Postby nicksilva » Fri Jul 22, 2016 3:52 pm

that rocks!
"Out of my mind. Back in 5 Minutes."
nicksilva
Vectric Craftsman
 
Posts: 217
Joined: Thu Aug 21, 2014 8:13 pm
Location: Dallas, TX USA
Model of CNC Machine: ULS M300, Rockler 60th Ann. Shark

Re: It's Finished!!!

Postby MarkJohnston » Fri Jul 22, 2016 5:17 pm

That's terrific!!!

What really cool to me is you started out asking for a little help in one area and we see the results of that help and much more.

This forum is great.

Mark
MarkJohnston
Vectric Wizard
 
Posts: 747
Joined: Tue Jun 01, 2010 4:51 pm
Location: Prescott AZ
Model of CNC Machine: CAMaster MC4848

Re: It's Finished!!!

Postby Warped Mind » Fri Jul 22, 2016 5:29 pm

Mark you are correct, just a little direction is what I needed and your help along with a few others made it possible. Now I feel like I am really learning the software, thanks again to all who helped.
Warped Mind
Vectric Craftsman
 
Posts: 185
Joined: Thu Nov 21, 2013 9:10 pm
Location: York, SC
Model of CNC Machine: Laguna IQ

Next

Return to Aspire - General

Who is online

Users browsing this forum: Cliff Braford, Google [Bot] and 11 guests