Ontario Canada-user group get together-Any interest?
Re: Ontario Canada-user group get together-Any interest?
Hi jason okay I am glad your cops in the states dont pull you over in the states. Look on your map see thunder bay follow the road east go to saue steint marie that is 10 hour drive at 100 to 120 km whitch is around 70 miles per hour . I know I was a truck driver I have drove that route and I know a truck traveling 115 it will take nearly a full working day to drive that distance . then it is another 3 hours to sudbury. That is canadian rds. Maybe you can time travel in the states but here in canada we havent figured it out.... Just joking but the map I find is further than it looks some times. If you do go by canada I live half way between the sue and sudbury if you want to stop for a coffee your welcome.
-
- Vectric Wizard
- Posts: 1687
- Joined: Sun Oct 24, 2010 7:28 pm
- Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)
- Location: Guelph, Ontario
- Contact:
Re: Ontario Canada-user group get together-Any interest?
Sudbury ? And miss Manitoulin Island? Don't forget that Guelph is on #6, straight down from Tobermory. Ferry starts up May 3.
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
Re: Ontario Canada-user group get together-Any interest?
was going to tell him that when he got this far
-
- Vectric Wizard
- Posts: 679
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
Re: Ontario Canada-user group get together-Any interest?
Brief Update.
A rep from Weicon and another from Knell's Hardware have offered to attend our meeting, and show us some products that may be of interest. One product in particular is the MS1000 casting resin, which can be used to coat many products, including foam. I ran a test of one of their adhesives on hdu foam, and it worked quite well.
A rep from Weicon and another from Knell's Hardware have offered to attend our meeting, and show us some products that may be of interest. One product in particular is the MS1000 casting resin, which can be used to coat many products, including foam. I ran a test of one of their adhesives on hdu foam, and it worked quite well.
-
- Vectric Apprentice
- Posts: 51
- Joined: Sat Feb 18, 2012 7:57 pm
- Model of CNC Machine: Shopbot Buddy Alpha48
- Location: Timmins, North Eastern Ontario, Canada
- Contact:
Re: Ontario Canada-user group get together-Any interest?
I would be interested in attending. I'm up in North-Eastern ON (about 800 km North of Toronto) but it's only a 1 1/2 hour flight to Toronto, and another hour drive to Guelph - I know the area well as I went to both University & College in that area.
All depends upon what my work load is, vs the timing - and my wife's work schedule as well. Try and make a weekend trip out of it if possible, we have a lot of friends still living in the Guelph area. She can visit and I can attend the meeting.
Andrew J Coholic
Joe Coholic Custom Furniture Ltd.
All depends upon what my work load is, vs the timing - and my wife's work schedule as well. Try and make a weekend trip out of it if possible, we have a lot of friends still living in the Guelph area. She can visit and I can attend the meeting.
Andrew J Coholic
Joe Coholic Custom Furniture Ltd.
-
- Vectric Wizard
- Posts: 679
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
Re: Ontario Canada-user group get together-Any interest?
Hi Andrew.
That's along way to come for our little meeting. I don't want you to get the wrong impression here. This meeting is no way near the level of expertise that Roger and Jamie have. Our's is an informal get together, to exchange ideas and hopefully take some knowledge back home.
You are more than welcome to attend.
That's along way to come for our little meeting. I don't want you to get the wrong impression here. This meeting is no way near the level of expertise that Roger and Jamie have. Our's is an informal get together, to exchange ideas and hopefully take some knowledge back home.
You are more than welcome to attend.
- T.R.MacMunn
- Vectric Wizard
- Posts: 318
- Joined: Sun Jan 01, 2012 2:30 pm
- Model of CNC Machine: CAMaster MC4836
- Location: Mountain Grove, Ontario, Canada
- Contact:
Re: Ontario Canada-user group get together-Any interest?
John, if it's me you're referring to in the last post, any "expertise" I have sure ain't in Aspire. If it wasn't for Glen Peterson, Tim Merrill & Michael Mezalick poking me with sharp sticks I'd still be pulling out the chisels & the jigsaw for everything...... Jemima would be a 740lb ornament.
-
- Posts: 9
- Joined: Fri Jul 20, 2012 8:29 pm
- Model of CNC Machine: Camaster Stinger I
- Location: Ontario Canada
Re: Ontario Canada-user group get together-Any interest?
Hi John
I'm interested in attending if the date works out.
Eric Maaskant
Norwich ON
I'm interested in attending if the date works out.
Eric Maaskant
Norwich ON
-
- Posts: 3
- Joined: Mon Nov 02, 2009 8:53 pm
- Model of CNC Machine: axyz
- Location: Thornhill, Ontario, Canada
Re: Ontario Canada-user group get together-Any interest?
Hello John,
First time on the forum but learning from it for some time.
Would like to learn from experienced people and make friends.
I am interested and would be grateful if you can keep me informed.
Zain.
First time on the forum but learning from it for some time.
Would like to learn from experienced people and make friends.
I am interested and would be grateful if you can keep me informed.
Zain.
-
- Vectric Apprentice
- Posts: 51
- Joined: Sat Feb 18, 2012 7:57 pm
- Model of CNC Machine: Shopbot Buddy Alpha48
- Location: Timmins, North Eastern Ontario, Canada
- Contact:
Re: Ontario Canada-user group get together-Any interest?
Just wondering (I am assuming no date set yet?)
The Canadian WMS (woodworking machinery show) is again this fall in Toronto, back at the International Center...Oct 24-26. Perhaps having the get together that weekend might work as well? I for one attend this show and will be down in SOuthern ON already.
Just a thought
AJC
The Canadian WMS (woodworking machinery show) is again this fall in Toronto, back at the International Center...Oct 24-26. Perhaps having the get together that weekend might work as well? I for one attend this show and will be down in SOuthern ON already.
Just a thought
AJC
-
- Vectric Wizard
- Posts: 679
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
Re: Ontario Canada-user group get together-Any interest?
Hi AJ
I've been swamped here for the last few weeks, so I didn't have allot of time to devote to the meeting.
I think we will be shooting for the end of june sometime. for those of you who have visited my shop, it's not all that big, and I'd like to be able to have the doors open, so we can have a little more room.
I'm hoping to be able to devote more time to this next week.
John
I've been swamped here for the last few weeks, so I didn't have allot of time to devote to the meeting.
I think we will be shooting for the end of june sometime. for those of you who have visited my shop, it's not all that big, and I'd like to be able to have the doors open, so we can have a little more room.
I'm hoping to be able to devote more time to this next week.
John
-
- Posts: 6
- Joined: Sun Apr 02, 2017 3:19 pm
- Model of CNC Machine: Oliver 1015
Re: Ontario Canada-user group get together-Any interest?
Hello every one, i read a lot about meetings and such ,but all those post are from a few years back,Are there any members in the niagara ontario area ? Iam from St Catharines and new to the hobby,i would love to talk to some of the members here in southern ontario,and once i get more familiar with my machine and the cnc hobby ,then i'am most interested in meetings a bit further from home .
-
- Vectric Wizard
- Posts: 1687
- Joined: Sun Oct 24, 2010 7:28 pm
- Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)
- Location: Guelph, Ontario
- Contact:
Re: Ontario Canada-user group get together-Any interest?
Guelph here ... i'm in for a summer meet!
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
-
- Vectric Craftsman
- Posts: 102
- Joined: Sat Oct 06, 2012 11:51 am
- Model of CNC Machine: my own design
- Location: Cambridge Ontario
Re: Ontario Canada-user group get together-Any interest?
Sounds good. Cambridge here.
Ed
Ed
-
- Vectric Wizard
- Posts: 772
- Joined: Sat Jan 09, 2010 7:28 am
- Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
- Location: Buffalo,NY
Re: Ontario Canada-user group get together-Any interest?
I'm from Buffalo,NY and I visit Hamilton quite a few times because my stepson lives in Stoney Creek and my wife is from Hamilton.
Tony
Tony
What will matter is not what you bought but what you built; not what you got, but what you gave