Font Issue

This forum is for general discussion about Aspire

Font Issue

Postby Tscholl » Thu Aug 22, 2019 10:50 pm

I am trying to cut a small sign with Alcubierre font. It an open font. When I cut the sign I get ‘bumps’ or overlaps. Notice on the letters g, u and r. The bumps don’t show when I run the preview. I am running this on a Biesse Skill. The VPOINT bit is a 60 degree cutter. Aspire version 9.517. I've attached the crv3d and a pdf of the actual cutout.
Is there a way I can run this file without the bumps?
Thanks
Attachments
font issue.pdf
(1.11 MiB) Downloaded 36 times
MID OFFICE.crv3d
(710 KiB) Downloaded 16 times
Tscholl
 
Posts: 27
Joined: Fri Mar 01, 2013 4:55 pm
Model of CNC Machine: Biesse Skill

Re: Font Issue

Postby highpockets » Fri Aug 23, 2019 12:14 am

Might want to check that the 60° bit is actually 60°
viewtopic.php?t=2164
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 2292
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Font Issue

Postby Rcnewcomb » Fri Aug 23, 2019 1:02 am

In the file you attached you specified a 90 degree V bit.
Attachments
Bit90.PNG
- Randall Newcomb
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3517
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Font Issue

Postby Tscholl » Fri Aug 23, 2019 3:22 pm

That was it - I had the wrong information in the tool data - thanks
Tscholl
 
Posts: 27
Joined: Fri Mar 01, 2013 4:55 pm
Model of CNC Machine: Biesse Skill


Return to Aspire - General

Who is online

Users browsing this forum: Google [Bot] and 21 guests