Am I just crazy or what?

This forum is for general discussion regarding VCarve Pro
DwayneInfo
Posts: 34
Joined: Wed Dec 06, 2006 2:06 am
Location: Houston, TX

Post by DwayneInfo »

Hi Warren,

Glad you did some testing. based on what I saw in my machine I had already cocluded it was in the leadscrew. Gonna change all of that soon anyway, so not a big deal right now. But it looks as though you found a climb/conventional cut issue as I did. Makes me feel better that I have not completely lost my mind....LOL. I did something else last night, I cut my wifes name out and told it to add tabs, They showed in the preview but did not come out in the part. I even cut it another time with larger tabs ( 1.2"w x .200tall) and it still did not cut them. I am in South Dakota for the rest of the week for work. I will try more when I get home to see if I can figure out the tab problem. As I said earlier....I love to experiment.

Dwayne

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5886
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Post by Rcnewcomb »

I am in South Dakota for the rest of the week for work.
If you are in Hartford (near Sioux Falls, SD) drop by our shop. We love to meet another v-carver.

Our phone number and address are on our web site: http://www.222artisans.com

Markm
Vectric Apprentice
Posts: 91
Joined: Thu Mar 23, 2006 6:19 am
Location: Fargo ND

Post by Markm »

Hello RC
I am up in Fargo ND but I do get to SF all the time we own Hurley's and have a store in SF at 2520 S minnesota Ave. Next time I run down to check up on my manager I will drop you a note.

Mark M
markmcallister@hughes.net

DwayneInfo
Posts: 34
Joined: Wed Dec 06, 2006 2:06 am
Location: Houston, TX

Post by DwayneInfo »

As near as I can tell I am at least 50 miles from anything and right next to nothing. I am in Sisseton, approx 1 1/2 hrs South of Fargo. I flew into Fargo yesterday. I would love to see what others are doing, either as a hobby or a business.

Dwayne

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5886
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Post by Rcnewcomb »

I am at least 50 miles from anything and right next to nothing
Yep, that pretty accurately describes most of South Dakota... :lol:
I am in Sisseton
You are about 2 hours north of our shop

DwayneInfo
Posts: 34
Joined: Wed Dec 06, 2006 2:06 am
Location: Houston, TX

Post by DwayneInfo »

If it were not for my offshore fishing addiction...I could live here.

darde
Vectric Apprentice
Posts: 84
Joined: Mon Sep 25, 2006 6:44 pm

Post by darde »

My wife is from Hankinson ND. between both of you. I was down for the holidays. We live in Canada 9 miles north of the international peace gardens.

Post Reply