Hey guys... and gals,
A very good friend, retired Marine, has asked me to make a pair of display boxes for his two swords. I would like to do this for him as a gift, but I'm sure that the fiber of this gentelman will not allow it. So, while he is asking for a simple "box", if I can find it, I would love to put a 3D carving on both ends of the boxes of the U.S. Marine Corps emblem The globe, eagle and anchor.
I have yet to see the swords, but I am guessing that the end pieces would be about 6" wide x 8" tall.
I am going to post this on both the Vectric and ShopBot forums, and am hoping that someone can help be to beg, borrow or steal this... although I will pay for it.
Any help will be greatly appreciated.
Thanks,
Les
Marine Corp Emblem 3D
- Les_linton
- Vectric Craftsman
- Posts: 148
- Joined: Sun May 28, 2006 5:52 pm
- Model of CNC Machine: ViperX7
- Location: Pekin, IL
Les
I have the Marine Corp seal and will post to free files section this evening. You will have to judge if the resolution is sufficient for you needs. I made a carving for an ex marine with name, seal, etc. and reduced the poor guy to tears. Very satisfying....
I have the Marine Corp seal and will post to free files section this evening. You will have to judge if the resolution is sufficient for you needs. I made a carving for an ex marine with name, seal, etc. and reduced the poor guy to tears. Very satisfying....
Chris Lyon
c.lyon2@verizon.net
c.lyon2@verizon.net
Les
Here you are.
Chris
Here you are.
Chris
- Attachments
-
- MarineSeal.crv
- VCarve Pro file of Marine Seal. Graphic from the Marine website, converted to vector art via Inkscape.
- (1.29 MiB) Downloaded 1183 times
Chris Lyon
c.lyon2@verizon.net
c.lyon2@verizon.net
- Les_linton
- Vectric Craftsman
- Posts: 148
- Joined: Sun May 28, 2006 5:52 pm
- Model of CNC Machine: ViperX7
- Location: Pekin, IL
- dighsx
- Vectric Wizard
- Posts: 939
- Joined: Tue Nov 01, 2005 12:36 am
- Location: Royal Oak, Michigan USA
- Contact:
Here's the file in the current live version of the software. The other version is still in testing and hasn't been released yet.
- Attachments
-
- MarineSeal.crv
- (273.5 KiB) Downloaded 784 times
Take it easy.
Jay (www.cncjay.com)
Jay (www.cncjay.com)
Les you could check out this site...they might have what you need
http://vector-images.com/image.php?epsid=6430
Chuck
http://vector-images.com/image.php?epsid=6430
Chuck
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Hi Les,
Brands of the World have a vector file which can be downloaded free at http://www.brandsoftheworld.com/search/ ... rine+corps
It looks as though it has been digitised so the text isnt great, but I've seen far worse too
Cheers
Brian
Brands of the World have a vector file which can be downloaded free at http://www.brandsoftheworld.com/search/ ... rine+corps
It looks as though it has been digitised so the text isnt great, but I've seen far worse too
Cheers
Brian
- Les_linton
- Vectric Craftsman
- Posts: 148
- Joined: Sun May 28, 2006 5:52 pm
- Model of CNC Machine: ViperX7
- Location: Pekin, IL