Looking for a fighting Tarpon
- andyb
- Vectric Wizard
- Posts: 301
- Joined: Fri Jun 02, 2006 2:11 am
- Model of CNC Machine: MultiCAM, Shopbot PRTAlpha
- Location: Oakwood, GA
- Contact:
Looking for a fighting Tarpon
Does anyone know where I can get a vector of a Tarpon that in fighting like it has been hooked? Or, even a good JPEG that I can convert. Searched Google and didn't find a good one.
Andy B.
Andy B.
Lotsa tarpons on google but couln't find a fighting one to convert quickly. Here is one but not much of a fighter.
- Attachments
-
- Tarpon.eps
- (178.25 KiB) Downloaded 360 times
-
- Tarpon.jpg
- (18.07 KiB) Downloaded 213 times
One more a little more stylized
- Attachments
-
- tarpon2.jpg (13.03 KiB) Viewed 4172 times
-
- tarpon2.eps
- (214.67 KiB) Downloaded 344 times
- dighsx
- Vectric Wizard
- Posts: 939
- Joined: Tue Nov 01, 2005 12:36 am
- Location: Royal Oak, Michigan USA
- Contact:
I'm glad someone knew what a Tarpon was. I guess it just proves I spend way too much time indoors.
Take it easy.
Jay (www.cncjay.com)
Jay (www.cncjay.com)
-
- Vectric Wizard
- Posts: 517
- Joined: Sun Apr 30, 2006 10:04 pm
- Model of CNC Machine: shopbot PRT Alpha 96x48
- Location: New Hampshire, USA
- Contact:
Andy,
This is all I have.
Paul Z
This is all I have.
Paul Z
- Attachments
-
- ANMAQ229.TIF
- (25.21 KiB) Downloaded 211 times
-
- SPOFS042.TIF
- (22.93 KiB) Downloaded 251 times
Pauls image vectorized with Inkscape and opened straight into VCPro.
Looks great!
Tony
Looks great!
Tony
- Attachments
-
- Tarpon.zip
- (646.96 KiB) Downloaded 322 times
-
- Tarpon.jpg
- (104.91 KiB) Downloaded 276 times
Yep I did the other one might cut it in the morning.
- Attachments
-
- tarpon5.jpg
- (148.67 KiB) Downloaded 282 times
-
- Vectric Wizard
- Posts: 517
- Joined: Sun Apr 30, 2006 10:04 pm
- Model of CNC Machine: shopbot PRT Alpha 96x48
- Location: New Hampshire, USA
- Contact:
Click art 125,000. I remember the license reads something "like the designs may be used for projects but can not be resold as clipart".
If you take the tif into a photo editing program, increase the number of pixels (4X), and then blur the image, sometimes it will improve inkscape's output.
Good luck.
Paul Z
If you take the tif into a photo editing program, increase the number of pixels (4X), and then blur the image, sometimes it will improve inkscape's output.
Good luck.
Paul Z
-
- Vectric Wizard
- Posts: 517
- Joined: Sun Apr 30, 2006 10:04 pm
- Model of CNC Machine: shopbot PRT Alpha 96x48
- Location: New Hampshire, USA
- Contact:
Tarpon 5 really looks nice. Please post the results if you cut it.
Paul Z
PS A short plug for Click Art -- I have found several hundred of the images to be ready to cut with no editing; Thousands more are usable with minimal editing. It's 9 CD's with a variety of formats and it's a great buy. I've seen it as low as $14.95 (US).
Paul Z
PS A short plug for Click Art -- I have found several hundred of the images to be ready to cut with no editing; Thousands more are usable with minimal editing. It's 9 CD's with a variety of formats and it's a great buy. I've seen it as low as $14.95 (US).
- andyb
- Vectric Wizard
- Posts: 301
- Joined: Fri Jun 02, 2006 2:11 am
- Model of CNC Machine: MultiCAM, Shopbot PRTAlpha
- Location: Oakwood, GA
- Contact:
Thanks to all that uploaded the tarpon graphics. Here are the two option that I sent to the customer. I may need to clean them up a little more. The other problem is that I have to purchase V-Carve Pro this Friday. My job was just eliminated the past Friday after 9 1/5 years with the company and I get my severance on Friday. I'm jumping with joy at the opportunity do my CNC work full-time.
Thanks again to all
Andy B.
Thanks again to all
Andy B.
- Attachments
-
- Egyhazi.jpg
- (136.49 KiB) Downloaded 208 times
-
- Egyhazi Tarpon 2 Round Top.jpg
- (109.46 KiB) Downloaded 231 times