Hi,
I just installed the upgrade and jumped into the Clipping option in 3D Modelling. It worked great!
However, in my test example I decided to change the vector to a different one.
- I removed clipping from the level.
- Selected the new vector
- Enabling clipping again
- The visible result was still using the old vector
So, I saved the model. close the file, then reloaded it. The clipping result is now as expected; it is using the new vector.
No sure if this is a desired affect.
Andy
VCarve 10 Pro - 3D Modeling - Clipping - Display Results
Re: VCarve 10 Pro - 3D Modeling - Clipping - Display Results
Hi Andy,
You shouldn't need to reopen the file to reset the clipping. My suspicion would be that just moving one of the models around would force a reset. I'll try to reproduce your issue. Thanks for the report.
Adam
You shouldn't need to reopen the file to reset the clipping. My suspicion would be that just moving one of the models around would force a reset. I'll try to reproduce your issue. Thanks for the report.
Adam
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: VCarve 10 Pro - 3D Modeling - Clipping - Display Results
Is there a VCP10 tutorial (or Tips and Tricks) that goes into the clipping mode in a more detailed, or step by step instruction?
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.