Im sure many of you know this already, but I just discovered it a couple weeks ago, and it's made my life a whole lot easier.
Let's say the work order calls for something 7-7/8 wide. You can look up 7/8 on a chart, or do the math with a calculator, or know that 7/8 is. .875
But... You can just type it in as 7 7/8=
When you hit the "=" it does the math and Ta-Da! It changes it to 7.875
This has made things go so much faster for me.
Fractions: the EASY way
-
- Vectric Staff
- Posts: 525
- Joined: Wed Jul 19, 2017 11:59 am
- Model of CNC Machine: Craft CNC DS1
Re: Fractions: the EASY way
Glad it's been helpful for you! Here is a bit more information in the docs as well in case that's of any use to you or others.
https://docs.vectric.com/docs/V9.5/VCar ... Boxes.html
https://docs.vectric.com/docs/V9.5/VCar ... Boxes.html
--------------
Mohamed
++++++++
Mohamed
++++++++
-
- Vectric Wizard
- Posts: 1701
- Joined: Sun Sep 23, 2012 12:14 pm
- Model of CNC Machine: CNC Shark Pro, Probotix Meteor 25" x 50"
Re: Fractions: the EASY way
Yep. Fractions and even math in most number entry boxes. I'll use my tape measure, and might "think" a measurement is 12 inches plus a half less a sixteenth. Put it in as 12+.5-1/16= to get 12.4375. A brilliant feature IMO.
4D
4D
-
- Vectric Craftsman
- Posts: 232
- Joined: Wed Mar 22, 2017 9:34 pm
- Model of CNC Machine: eBay special China 3040
Re: Fractions: the EASY way
Huh? Read the manual? That's for sissies!mohamed wrote:Glad it's been helpful for you! Here is a bit more information in the docs as well in case that's of any use to you or others.
https://docs.vectric.com/docs/V9.5/VCar ... Boxes.html