VCarve 8.024.
I did the original drawning in Sketchup, did the second pass in AutoCAD. exported both as DXF/DWG.
horizontal lines are off at 3 degree angle, vertical 1.3 (leaning into the other) .... the degree and direction vary upon opening +/- 2 or 3 degrees (so far)
even tried reopening the files back in AutoCAD- they were good there.
Any suggestions on where to start trouble shooting this? or a good old "this is how to fix it" would be appreciated.
Many Thanks
-dean
imported vectors skewed
- Rcnewcomb
- Vectric Archimage
- Posts: 5929
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: imported vectors skewed
This FAQ might help: What are some problems and solutions for importing DXF files?
This might be the first one to try:
This might be the first one to try:
try exporting the file again from the original CAD system in AutoCAD R12 or R14 format as these tend to be more compatible
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop