Screen Settings

This forum is for general discussion regarding VCarve Pro

Screen Settings

Postby JMOlshefski » Sat Jul 20, 2019 12:31 pm

This may seem like a very basic question, but I just cannot seem to figure it out, is there a way/setting to see both the "Drawing" and the "Toolpath" at the same time on the screen?
JMOlshefski
 
Posts: 22
Joined: Sat Nov 22, 2014 11:32 pm
Model of CNC Machine: CNC Shark II

Re: Screen Settings

Postby dakotablue » Sat Jul 20, 2019 12:42 pm

On the Toolpath tab you can click the pin and the toolpath tab will stay there til you click the pin again. If this is what you're meaning.
dakotablue
 
Posts: 19
Joined: Tue Apr 02, 2019 11:30 pm
Model of CNC Machine: opensource

Re: Screen Settings

Postby Bob Jr » Sat Jul 20, 2019 2:01 pm

How about this:
both.PNG
(3.28 KiB) Not downloaded yet

Bob
hammer...nails...stuff
User avatar
Bob Jr
Vectric Craftsman
 
Posts: 279
Joined: Thu Aug 13, 2009 2:13 am
Model of CNC Machine: CNC Shark, Axiom,Phoenix

Re: Screen Settings

Postby Adrian » Sat Jul 20, 2019 3:52 pm

You can also use the Page Up and Page Down keys to split the views. Double click on a window header to return to normal.
User avatar
Adrian
Vectric Archimage
 
Posts: 9369
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Screen Settings

Postby SteveNelson46 » Sat Jul 20, 2019 4:27 pm

If you're looking for something like this, click on the stick pins in the corners shown by a red arrow. They will toggle from "automatically hide" to "stay in place".
Attachments
Drawing and Toolpath.jpg
Steve
User avatar
SteveNelson46
Vectric Wizard
 
Posts: 486
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Camaster Stinger with Recoil Lathe

Re: Screen Settings

Postby Adrian » Sat Jul 20, 2019 4:43 pm

Guess we need a bit more information on what you mean by Drawing and Toolpath. Some are assuming you're talking about the tabs and others are assuming you're talking about the 2D (Drawing) and 3D (Toolpath) windows.
User avatar
Adrian
Vectric Archimage
 
Posts: 9369
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48


Return to VCarve - General

Who is online

Users browsing this forum: Google [Bot], Jan.vanderlinden and 36 guests