I have Vtransfer on one of my computers, but not on the one I use to send to the machine. How do I load this to my machine, also does any of you use this transfer to send your files?
Thanks, Aaron
vtranfer
- Adrian
- Vectric Archimage
- Posts: 14657
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: vtranfer
You would need to re-install as far as I know as the option to install Vtransfer is only presented at the time of installation. Unlike the other optional add-ons like the thumbnail viewer there doesn't seem to be a separate install program for it.
Most people here wouldn't use it as it's not needed for traditional type CNC machines. It's only needed for the x-carve type machines that need an internet connection to use the standard software.
Most people here wouldn't use it as it's not needed for traditional type CNC machines. It's only needed for the x-carve type machines that need an internet connection to use the standard software.
- Martin Reid
- Vectric Apprentice
- Posts: 93
- Joined: Wed May 18, 2016 6:00 pm
- Model of CNC Machine: Shopbot
- Location: Lancashire UK
- Contact:
Re: vtranfer
Dear Aaron
I don't use it but the VTransfer web page is here...
https://docs.vectric.com/docs/V9.0/Cut2 ... nsfer.html
sincerely
Martin
I don't use it but the VTransfer web page is here...
https://docs.vectric.com/docs/V9.0/Cut2 ... nsfer.html
sincerely
Martin
-
- Vectric Staff
- Posts: 539
- Joined: Wed Jul 19, 2017 11:59 am
- Model of CNC Machine: Craft CNC DS1
Re: vtranfer
The VTransfer installer should be in your VCarve installation directory (i.e C:/Program Files/VCarve Pro 9.5 for example). Please make sure you've patched to the latest version of 9.5 (9.517 I think) before installing V-Transfer to make sure you have the latest version.
--------------
Mohamed
++++++++
Mohamed
++++++++