vtranfer

This forum is for general discussion regarding VCarve Pro
Post Reply
Aaron Laverty
Posts: 2
Joined: Sun Feb 03, 2019 2:13 am
Model of CNC Machine: x carve

vtranfer

Post by Aaron Laverty »

I have Vtransfer on one of my computers, but not on the one I use to send to the machine. How do I load this to my machine, also does any of you use this transfer to send your files?

Thanks, Aaron

User avatar
Adrian
Vectric Archimage
Posts: 14541
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: vtranfer

Post by Adrian »

You would need to re-install as far as I know as the option to install Vtransfer is only presented at the time of installation. Unlike the other optional add-ons like the thumbnail viewer there doesn't seem to be a separate install program for it.

Most people here wouldn't use it as it's not needed for traditional type CNC machines. It's only needed for the x-carve type machines that need an internet connection to use the standard software.

User avatar
Martin Reid
Vectric Apprentice
Posts: 93
Joined: Wed May 18, 2016 6:00 pm
Model of CNC Machine: Shopbot
Location: Lancashire UK
Contact:

Re: vtranfer

Post by Martin Reid »

Dear Aaron

I don't use it but the VTransfer web page is here...

https://docs.vectric.com/docs/V9.0/Cut2 ... nsfer.html

sincerely
Martin

mohamed
Vectric Staff
Posts: 522
Joined: Wed Jul 19, 2017 11:59 am
Model of CNC Machine: Craft CNC DS1

Re: vtranfer

Post by mohamed »

The VTransfer installer should be in your VCarve installation directory (i.e C:/Program Files/VCarve Pro 9.5 for example). Please make sure you've patched to the latest version of 9.5 (9.517 I think) before installing V-Transfer to make sure you have the latest version.
--------------
Mohamed
++++++++

Post Reply