HELP! Need to get LASER pp file to show up in 9.5
-
- Posts: 13
- Joined: Mon Mar 06, 2017 1:37 am
- Model of CNC Machine: Shark
- Location: Hamilton, Montana in the beautiful Bitterroot Valley of western MT
HELP! Need to get LASER pp file to show up in 9.5
I lost battery on old computer. I did copy my CNC data to thumb drive. I need a .pp LASER file imported into my VCarve Pro 9.5 program, but I do not know the correct file folder *Under VCarve Pro 9.5* to cut and paste into. I have it (perhaps foolishly) copied to all listed folders under the File Tree of VCarve Pro 9.5, but it is not showing up when I go in the Tool Selection side of the tool paths. How do I get the laser file to show up so I may use it in a newly created file? Thanks very much. I need to laser some coasters I have created for a graduation party tomorrow afternoon.... (Sunday, June 2).
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: HELP! Need to get LASER pp file to show up in 9.5
It's usually in:
C:\ProgramData\Vectric\ProgramName\V9.5
You can also select the file menu\"open application data folder"
C:\ProgramData\Vectric\ProgramName\V9.5
You can also select the file menu\"open application data folder"
Steve
-
- Posts: 13
- Joined: Mon Mar 06, 2017 1:37 am
- Model of CNC Machine: Shark
- Location: Hamilton, Montana in the beautiful Bitterroot Valley of western MT
Re: HELP! Need to get LASER pp file to show up in 9.5
Steve, Thanks for answering. I have C:\Program Files(X86)\VCarve Pro 9.5\ then the folders showing are: backup, fonts, icons, language, lua, ps, res, win32, x64
and NO file menu in my Search C: or in Search VCarve Pro 9.5, nor do I have a way to open Application Data folder (since I don't see one in 9.5.
Thoughts? thank you so much for your time, Mark
and NO file menu in my Search C: or in Search VCarve Pro 9.5, nor do I have a way to open Application Data folder (since I don't see one in 9.5.
Thoughts? thank you so much for your time, Mark
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: HELP! Need to get LASER pp file to show up in 9.5
Mark,
You're looking in the wrong place.
The easiest was is as Steve stated, in VCarve, under File->Open Application Data Folder. There will be two folders associated with Post Processors, one called PostP and another called My_PostP
You're looking in the wrong place.
The easiest was is as Steve stated, in VCarve, under File->Open Application Data Folder. There will be two folders associated with Post Processors, one called PostP and another called My_PostP
John
Maker of Chips
Maker of Chips
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: HELP! Need to get LASER pp file to show up in 9.5
In V Carve Pro, click the File menu, then "Open Application Data Folder". It HAS to be there.
Gerry - http://www.thecncwoodworker.com