Tool path origin question

This forum is for general discussion regarding VCarve Pro
Post Reply
acs_user
Posts: 17
Joined: Sat Apr 27, 2019 3:15 pm
Model of CNC Machine: Shop Sabre Pro 408

Tool path origin question

Post by acs_user »

All,
Why do my tool paths start over to the right in the attached picture? This is a drawing that was sent to me and I've compared it to drawings I've created and I can't seem to figure out why they all reference that point.

Tool_Path_Origin.PNG

User avatar
scottp55
Vectric Wizard
Posts: 4704
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Tool path origin question

Post by scottp55 »

Probably the "Home" position.....look up top on the toolpath panel, and click open...it will be on the bottom.
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

Post Reply