My logo on the job set up sheet

[cusoak]

I think you can replace the vectric logo on the job set up sheet.? I want to put my own on
I wanting to know what type of file I need to be able top put on the job sheet.
And what size is the area that a logo can into
Jeff

[Adrian]

It's on the Setup Sheet Editor. It scales the image to the needed size (165x52) and it needs to be in gif, jpeg or png format.

[cusoak]

Thanks Adrian
Can you tell me what the 165x52 means
When I put my logo in it is really small.
So is the vectric logo the 165x52

[Adrian]

Presumably the size in pixels of the image. It's not a feature I use so I've never changed the logo but generally when dimensions are quoted like that referring to images it's pixel based.

[cusoak]

OK thanks . one other thing I was looking at the set up for the job sheet and i see that there is a place to put notes in my sheet when printed does not have that section.
it is checked. also i do not know where to even put notes so they would show up.
Jeff

[Adrian]

There are lots of places you can put notes in VCarve and you can even have them output into the post processor so they display on the control software. I do that all the time.

At the job level you can creates notes from the Edit menu. Within the tool database you can put notes against each individual tool (you can override those notes within the Tool/Edit section of the toolpath as well) and you can put notes against a toolpath by clicking the Toolpath Summary icon (clock) or double clicking the Toolpaths text at the top of the list.

[cusoak]

Thanks Adrian.

[Mike Choate]

I tried this gadget as will and was having the same Company Logo issue

[wb9tpg]

There are lots of places you can put notes in VCarve and you can even have them output into the post processor so they display on the control software. I do that all the time.

Yep, I love that feature and use it a lot. I use CNCjs and they show up on the screen for me.

and I customized my post processor to do that